The aim of the present study was to assess the feasibility and utility of 3D printing technology in surgical planning of a transcutaneous bone-conduction hearing device (Bonebridge) (BB), focusing on the identification of the proper location and placement of the transducer. 3D printed (3DP) models of three human cadaveric temporal bones, previously submitted to CT scan, were created with the representation of a topographic bone thickness map and the sinus pathway on the outer surface. The 3DP model was used to detect the most suitable location for the BB. A 3DP transparent mask that faithfully reproduced the surface of both the temporal bone and the 3DP model was also developed to correctly transfer the designated BB area. The accuracy of the procedure was verified by CT scan: a radiological marker was used to evaluate the degree of correspondence of the transducer site between the 3DP model and the human temporal bone. The BB positioning was successfully performed on all human temporal bones, with no difficulties in finding the proper location of the transducer. A mean error of 0.13 mm was found when the transducer site of the 3DP model was compared to that of the human temporal bone. The employment of 3D printing technology in surgical planning of BB positioning showed feasible results. Further studies will be required to evaluate its clinical applicability.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6036958 | PMC |
| http://dx.doi.org/10.14639/0392-100X-1625 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
3D printing in palliative medicine: systematic review.
BMJ Support Palliat Care
December 2024
Health Research Institute, School of Design, and Confirm Smart Manufacturing Centre, University of Limerick, Limerick, Ireland
Background: Three-dimensional printing (3DP) enables the production of highly customised, cost-efficient devices in a relatively short time, which can be particularly valuable to clinicians treating patients with palliative care intent who are in need of timely and effective solutions in the management of their patients' specific needs, including the relief of distressing symptoms.
Method: Four online databases were searched for articles published by December 2020 that described studies using 3DP in palliative care. The fields of application, and the relevant clinical and technological data were extracted and analysed.
Three-dimensional printed models improve orthopedic residents' understanding of adolescent idiopathic scoliosis.
BMC Med Educ
January 2025
Department of Spine Surgery, The Second Xiangya Hospital of Central South University, Changsha, China.
Background: Adolescent idiopathic scoliosis, a complex three-dimensional spine deformity, presents a formidable challenge for orthopedic residents in understanding its anatomy and surgical strategies. The aim of this study is to investigate the impact of three-dimensional printing (3DP) models in enhancing the comprehension of adolescent idiopathic scoliosis among orthopedic residents.
Methods: Forty orthopedic residents were randomly divided into two groups, the first group received lectures that were augmented with 3DP models illustrating five cases of adolescent idiopathic scoliosis, along with corresponding X-ray and CT images.
Clinical applications of 3D printing in spine surgery: a systematic review.
Eur Spine J
January 2025
In Silico Biomechanics Laboratory, National Center for Spinal Disorders, Buda Health Center, Budapest, Hungary.
Purpose: The objective of this systematic review is to present a comprehensive summary of existing research on the use of 3D printing in spinal surgery.
Methods: The researchers conducted a thorough search of four digital databases (PubMed, Web of Science, Scopus, and Embase) to identify relevant studies published between January 1999 and December 2022. The review focused on various aspects, including the types of objects printed, clinical applications, clinical outcomes, time and cost considerations, 3D printing materials, location of 3D printing, and technologies utilized.
Point-of-care additive manufacturing: state of the art and adoption in Spanish hospitals during pre to post COVID-19 era.
3D Print Med
December 2024
Diagnostic Imaging Department, Hospital de la Santa Creu i Sant Pau, Sant Antoni Maria Claret 167, 08025, Barcelona, Spain.
Background: 3D technologies [Virtual and Augmented 3D planning, 3D printing (3DP), Additive Manufacturing (AM)] are rapidly being adopted in the healthcare sector, demonstrating their relevance in personalized medicine and the rapid development of medical devices. The study's purpose was to understand the state and evolution of 3DP/AM technologies at the Point-of-Care (PoC), its adoption, organization and process in Spanish hospitals and to understand and compare the evolution of the models, clinical applications, and challenges in utilizing the technology during the COVID-19 pandemic and beyond.
Methods: This was a questionnaire-based qualitative and longitudinal study.
Three-Dimensional Bioprinting for Retinal Tissue Engineering.
Biomimetics (Basel)
December 2024
Department of Surgery, Division of Ophthalmology, University of Sherbrooke, Sherbrooke, QC J1G 2E8, Canada.
Three-dimensional bioprinting (3DP) is transforming the field of regenerative medicine by enabling the precise fabrication of complex tissues, including the retina, a highly specialized and anatomically complex tissue. This review provides an overview of 3DP's principles, its multi-step process, and various bioprinting techniques, such as extrusion-, droplet-, and laser-based methods. Within the scope of biomimicry and biomimetics, emphasis is placed on how 3DP potentially enables the recreation of the retina's natural cellular environment, structural complexity, and biomechanical properties.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!