MFI zeolites exchanged with various cations have gained a great deal of attention as catalysts. Increase in the ion-exchange capacity of zeolites can improve their catalytic properties by introducing more active sites; however, the ion-exchange capacity of MFI zeolites is limited by maximum aluminum content in the structure. To improve the ion-exchange capability of the MFI zeolites beyond the upper limit of the aluminosilicate MFI zeolites, we propose herein an approach to incorporate Zn(ii) in the zeolitic framework, because Zn in the framework sites generates two negative charges per atom. Using zincoaluminosilicate gels prepared via co-precipitation, organic-free synthesis of zincoaluminosilicate MFI zeolites was achieved. The obtained zincoaluminosilicate MFI zeolites had high Zn contents comparable to those in the initial zincoaluminosilicate gels with both Zn and Al in the zeolite framework. In contrast, the use of conventional sources of Si, Al, and Zn resulted in zeolites with extra-framework zinc oxide species. The obtained Zn-substituted MFI zeolites were shown to possess higher ion-exchange capacity compared to aluminosilicate MFI zeolites. It was also revealed that the zincoaluminosilicate MFI zeolites have high affinity for the divalent cation compared to the aluminosilicate analog, likely due to the two negative charges in close proximity. Because of these higher ion-exchange efficiencies, especially for divalent cations, the obtained zincoaluminosilicate MFI zeolites are expected to be efficient platforms for several important catalytic reactions.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/c8dt01391h | DOI Listing |
Pharmaceuticals (Basel)
November 2024
Faculty of Physics, Sofia University "St. Kliment Ohridski", 5 James Bourchier Blvd, 1164 Sofia, Bulgaria.
Objectives: The antimicrobial, oxidative activities, and ecotoxicity of synthesized silver-loaded zeolites (X and ZSM-5(MFI), Si-to-Al ratios 12 and 25) were studied, linking antimicrobial properties to material structure and released active silver species.
Methods: The materials were characterized by SEM, EDX, TEM, and XRPD. All materials, with a silver content of 1-3%wt for the Ss and about 35%wt for the X-zeolites, were tested against and .
Entropy (Basel)
December 2024
Engineering Thermodynamics, Process & Energy Department, Faculty of Mechanical Engineering, Delft University of Technology, Leeghwaterstraat 39, 2628 CB Delft, The Netherlands.
Entropies for alkane isomers longer than C are computed using our recently developed linear regression model for thermochemical properties which is based on second-order group contributions. The computed entropies show excellent agreement with experimental data and data from Scott's tables which are obtained from a statistical mechanics-based correlation. Entropy production and heat input are calculated for the hydroisomerization of C isomers in various zeolites (FAU-, ITQ-29-, BEA-, MEL-, MFI-, MTW-, and MRE-types) at 500 K at chemical equilibrium.
View Article and Find Full Text PDFJACS Au
December 2024
Department of Chemistry and Engineering Research Center of Advanced Rare-Earth Materials of Ministry of Education, Tsinghua University, Beijing 100084, P. R. China.
The significance of the nonoxidative dehydrogenation of middle-chain alkanes into corresponding alkenes is increasing in the context of the world's declining demands on transportation fuels and the growing demand for chemicals and materials. The middle-chain alkenes derived from the dehydrogenation reaction can be transformed into value-added chemicals in downstream processes. Due to the presence of multiple potential reaction sites, the reaction mechanism of the dehydrogenation of middle-chain alkanes is more complicated than that in the dehydrogenation of light alkanes, and there are few prior studies on elucidating their detailed structure-reactivity relationship.
View Article and Find Full Text PDFSmall Methods
December 2024
Nanchang Key Laboratory of Photoelectric Conversion and Energy Storage Materials, College of Science, Nanchang Institute of Technology, Nanchang, 330099, P. R. China.
Constructing a hollow structure inside zeolite is very helpful for improving its performance. Unlike the conventional alkaline etching technique usually operated at high temperature (typically 170 °C) and high pressure (autogenerated in autoclave), here, it is discovered that zeolite MFI nano-box can be achieved under mild etching conditions of atmospheric pressure and low temperature of 80 °C, making it very attractive for energy conservation and practical applications. A hollow-structure formation mechanism of protection-dissolution etching is demonstrated by characterizing MFI crystals obtained under different etching time, temperature, and etchant concentration.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
December 2024
Dalian Institute of Chemical Physics, Dalian National Laboratory for Clean Energy, State Key Laboratory of Catalysis, Zhongshan Road 457., 116023, Dalian, CHINA.
The photocatalytic oxidation of water with gaseous oxygen is environmentally benign for the synthesis of hydrogen peroxide (H2O2), but it is currently constrained by the inadequate supply of gaseous oxygen at the catalyst surface in a solid-liquid-gas triple-phase reaction system. Herein, we address this challenge by employing the zeolite encapsulated catalysts that efficiently enrich gaseous oxygen and accelerate the H2O2 synthesis in in aqueous conditions. We focus on the classical titania photocatalyst, encapsulating it within siliceous MFI zeolite crystals.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!