Fully automated sample preparation procedure to measure drugs of abuse in plasma by liquid chromatography tandem mass spectrometry.

For the analysis of drugs and pharmaceutical compounds in biological matrices, extraction procedures are typically used for LC-MS/MS analysis often requiring manual steps in sample preparation. In this study, we report a fully automated extraction method carried out by a programable liquid handler directly coupled to an LC-MS/MS system for the determination of 42 components (illicit drugs and/or metabolites) (plus 20 deuterated internal standards). The acquisition was performed in positive ionization mode with up to 15 MRM transitions per compound, each with optimized collision energy (MRM spectrum mode) to enable qualitative library searching in addition to quantitation. After placing the sample tube into the system, no further intervention was necessary: automated preparation used 50 μL of blood or plasma with 3 μL of extracted sample injected for analysis. The method was validated according to the requirements of ISO 15189. The limit of detection and quantification was 1-5 ng/mL depending on the compound. Stability experiments found that historic calibration curve data files could accurately quantify for up to 1 month with less than 20% uncertainty. Comparison to a QuEChERS method was made using patient samples providing a regression correlation R = 0.98 between the two methods. This approach was successfully designed to support parallel sample preparation and analysis therefore significantly increasing sample throughput and reduced cycle times. Graphical abstract ᅟ.