Intermolecular Dynamics of Perylene in Polymer Matrices during the Drop-Casting Process Probed by Fluorescence and Droplet Mass Changes.

Langmuir

Department of Chemical Biology and Applied Chemistry, College of Engineering , Nihon University, Koriyama , Fukushima 963-8642 , Japan.

Published: July 2018

This work examines the drop-casting process of a perylene-doped polymer film by monitoring the changes in fluorescence and droplet mass. The mass is then used to estimate the mean intermolecular distance r( t) changes during the casting process. At a low perylene concentration (0.01 mol %), the fluorescence band was maintained during and after the casting process of poly(methyl methacrylate) (PMMA), whereas the r( t) values suggested that the perylene dimer does not form. With an increase in the perylene concentration in the casting droplet, significant fluorescence changes were observed at an r( t) value of ∼3.0 nm; this was comparable to the Förster distance between the monomers. Fluorescence changes were attributed to energy migration from the monomer to the small amount of dimer species formed by fluctuation in solution (e.g., amplified quenching). The monomer fluorescence band decreased according to second-order kinetics after the formation of the excimer fluorescence band by molecular association. Following the decrease in monomer emission due to association, the excimer emission originated from the excitation of both the monomer and ground-state dimer. Fluorescence spectral changes did not reveal any significant dependence of the casting process on the polymer matrices. The minor changes of the fluorescence spectra originated from the reabsorption and segregation of the perylene crystals in the films, depending on the polymers (PMMA, polystyrene, and Zeonex) employed. This was attributed to the intermolecular interaction between perylene and the polymer side chains. Real-time monitoring of the mean distance of the dye during the casting process can provide a suitable fabrication process for functional polymer films by the spin and drop-casting methods. Moreover, the intermolecular dynamics for molecular assembly and nucleation and growth of crystals can be elucidated by studying the fluorescence changes.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acs.langmuir.8b01342DOI Listing

Publication Analysis

Top Keywords

casting process
16
fluorescence band
12
fluorescence changes
12
fluorescence
10
intermolecular dynamics
8
perylene polymer
8
polymer matrices
8
drop-casting process
8
fluorescence droplet
8
droplet mass
8

Similar Publications

Exposure to mid-energy radiation poses significant health risks, necessitating the development of effective shielding materials. Traditional lead-based shields, while effective, have significant drawbacks including toxicity and environmental concerns. This study investigates the potential of lead-free epoxy resin nanocomposites, incorporating bismuth oxide, nickel oxide, and cerium oxide, for mid-energy radiation protection.

View Article and Find Full Text PDF

This study evaluates the properties of starch/chitosan films (SCF) produced via the casting method, incorporating 40 % (w/w) plasticizers (glycerol and sorbitol) and various concentrations (0, 3, 5, and 10 % (w/w)) of nanoclays (Cloisite 20A, Cloisite 30B, and K-10). The effects of each nanofiller on the films were thoroughly investigated. Films containing nanoclays exhibited reduced water solubility and enhanced thermal stability compared to films without nanofillers.

View Article and Find Full Text PDF

Context: 3,4-Bis(3-nitrofurazan-4-yl) furoxan (DNTF) is a typical low-melting-point, high-energy-density compound that can serve as a cast carrier explosive. Therefore, understanding the safety of DNTF under different casting processes is of great significance for its efficient application. This study employed molecular dynamics simulations to investigate the effects of temperature and pressure on the self-diffusion characteristics and mechanical sensitivity of DNTF.

View Article and Find Full Text PDF

Background/purpose: High gold (Au) alloys have many advantages, such as good mechanical properties and stable chemical properties for dental restoration. The purpose of this investigation was to investigate the effect of zirconia (ZrO)-magnesia (MgO)-based investment combined with an argon arc vacuum pressure (Ar-arc VP) casting process on the recasting of high Au alloys.

Materials And Methods: The recasting Au alloys were compared between the control group of conventional SiO-based investment/horizontal centrifugal (HC) casting and the experimental group of ZrO-MgO-based investment/Ar-arc VP die casting.

View Article and Find Full Text PDF

Development of a model for detection and analysis of inclusions in tomographic images of iron castings using decision trees.

Sci Rep

January 2025

Department of Applied Computer Science and Modelling Department, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Krakow, Czarnowiejska 66, 30-054, Krakow, Poland.

CT images of castings made of ductile iron were analyzed in the paper. On these images, objects can be identified that can be considered as graphite precipitates or indicate the presence of a defect in the casting. Research conducted in this area is described, based on experimental data that allows to determine whether the indicated components present in the casting are graphite precipitation.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!