This study explored a new facile method of preparing ordered porous electrospun honeycomb fibers to obtain the most promising composites for maximal adsorption of volatile organic compounds (VOCs). The self-assembly ordered porous material (OPM) and polyacrylonitrile (PAN) were formulated into a blend solution to prepare honeycomb fibers. SEM and TEM images showed that OPM was effectively bonded in PAN fibers because of the composite’s structure. Acetone was used as a model to assess the VOC adsorption performances of electrospun honeycomb fibers with different OPM contents. Experimental results revealed that the adsorption capacity of honeycomb fibers increased with the increase of loaded OPM within the PAN fibers. The highest adsorption capacity was 58.2 μg g by the fibers containing with 60% OPM in weight. After several recycling times, the adsorption capacities of the reused honeycomb fibers were almost the same with the fresh fibers. This finding indicated that the electrospun honeycomb fibers have potential application in removing VOCs in the workplace, and promote the performance of masks for odor removal.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5977364 | PMC |
| http://dx.doi.org/10.3390/nano8050350 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
High pressure processing at different hydration levels as a tool to enhance rice bran stability and techno-functionality.
Food Res Int
February 2025
Institute of Agrochemistry and Food Technology (IATA-CSIC), Carrer del Catedràtic Agustín Escardino Benlloch, 7, 46980 Paterna, Valencia, Spain; Department of Food and Human Nutritional Sciences, University of Manitoba. Winnipeg, Canada. Electronic address:
High-pressure processing (HPP) enhances food safety and shelf life by inactivating microorganisms and preserving food quality, yet its effectiveness in low-humidity environments has not been evaluated. This study investigated the effects of HPP at 500 MPa for 15 min across varying hydration levels (15, 30, 60, 77 %) on rice bran (RB), aiming to identify microbial effectiveness, besides techno-functional and physicochemical properties. HPP effectively reduced mesophilic bacteria, molds and yeast of RB at > 15 % hydration level, achieving reductions of up to 4 logarithmic cycles in the latter, nearing the detection limit of the method.
View Article and Find Full Text PDFQuasi-static test data set of honeycomb hybrid tubes by FDM 3D printing.
Data Brief
February 2025
Department of Mechanical Engineering, Brawijaya University, Indonesia.
Crash box development is carried out continuously to obtain a lightweight design and high energy absorption. This dataset presents the results of a crash box experiments. Quasi-static testing of aluminum, honeycomb, and hybrid tube specimens was carried out using a universal testing machine.
View Article and Find Full Text PDFExperiment and Simulation Study on the Crashworthiness of Markforged 3D-Printed Carbon/Kevlar Hybrid Continuous Fiber Composite Honeycomb Structures.
Materials (Basel)
January 2025
Key Laboratory of Testing Technology for Manufacturing Process of Ministry of Education, Southwest University of Science and Technology, Mianyang 621010, China.
Article Synopsis
- Fiber hybridization helps address brittle fractures in composite honeycombs, but different fiber interactions create complex failure mechanisms.
- Researchers 3D-printed honeycomb composites using carbon and Kevlar fibers to study their structural failure through experiments and simulations.
- Results showed that carbon/Kevlar composites had the best energy absorption and cost-effectiveness, while CFRP had the highest load capacity; the presence of Kevlar led to ductile failure, contrasting with the brittle failure seen in Onyx honeycombs.
Optimized design, fabrication, and enhanced performance of honeycomb sandwich structure for excellent impact resistance and broadband microwave absorption.
J Colloid Interface Sci
March 2025
Shanxi Province Key Laboratory of Functional Polymer Composite Materials, College of Materials Science and Engineering, North University of China, Taiyuan 030051, China. Electronic address:
Lightweight microwave absorbing structures have wide applications in aerospace and military equipment. In general, honeycomb sandwich structure is regarded as an ideal choice. However, traditional honeycomb sandwich structure designs have limitations in improving absorption bandwidth, and their impact resistance remains unremarkable.
View Article and Find Full Text PDFThe Evaluation of Sandwich Composite Materials with Vegetable Fibers in a Castor Oil Polyurethane Matrix with Their Faces and Honeycomb Core Made in a 3D Printer.
Polymers (Basel)
October 2024
Department of Materials Engineering and Metallurgy, University of São Paulo, São Paulo 05508-220, Brazil.
Sandwich panels are widely used in the naval and aerospace industries to withstand the normal tensile, compressive, and shear stresses associated with bending. The faces of sandwich composites are usually made of metals such as aluminum and, in some studies with composites, using a polymeric matrix, but there are no studies in the literature using a castor oil polyurethane matrix. The core of the panel must keep the faces apart and be rigid perpendicular to them.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!