A graphene liquid cell for transmission electron microscopy (TEM) uses one or two graphene sheets to separate the liquid from the vacuum in the microscope. In principle, graphene is an excellent material for such an application because it allows the highest possible spatial resolution, provides a flexible covering foil, and effectively protects the liquid from evaporating. Examples in open literature have demonstrated atomic-resolution TEM using small liquid pockets and the coverage of whole biological cells with graphene sheets. A total of three different basic types of liquid cells are discerned: (i) one graphene sheet is used to cover a liquid sample supported by a thin membrane of another material (for example, silicon nitride, SiN), (ii) two graphene sheets pressed together leaving liquid pockets with graphene at both sides, and (iii) a spacer material with liquid pockets covered at both sides by graphene. A total of four different process flows are available for liquid cell assembly, but there is not yet a consensus on the best routes, and a number of variations exist. The key step is the transfer of graphene to a liquid sample, which is complicated by practical issues that arise from imperfections in the graphene sheets, such as cracks. This review provides an overview of these different approaches to assembling graphene liquid cells and discusses the main obstacles and ideas to overcome them with the prospect of developing the nanoscale technology needed for graphene liquid cells so that they become available on a routine basis for electron microscopy in liquid. It also provides guidance in selecting the appropriate type of graphene liquid cell and the best assembly method for a specific experiment.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.nanolett.8b01366 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Anticorrosion properties of ionic liquid functionalized graphene oxide epoxy composite coating on the carbon steel for CCUS environment.
Environ Sci Pollut Res Int
January 2025
Department of Chemical Engineering, Indian Institute of Technology Guwahati, Guwahati, 781039, Assam, India.
The adoption of carbon capture, utilization, and storage (CCUS) technology is increasingly prevalent, driven by the global initiative to conserve energy and reduce emissions. Nevertheless, CCUS has the potential to induce corrosion in equipment, particularly in high-pressure environments containing carbon dioxide (CO). Therefore, anti-corrosion protection is necessary for the metal utilized for CO production and storage equipment.
View Article and Find Full Text PDFFoaming ink for 3D-printing of ultralight and hyperelastic graphene architectures: Multiscale design and ultra-efficient electromagnetic interference shielding.
J Colloid Interface Sci
January 2025
School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 China; Guangdong Provincial Laboratory of Chemistry and Fine Chemical Engineering Jieyang Center, School of Advanced Manufacturing, Guangdong University of Technology, Jieyang 515200 China. Electronic address:
Extrusion-based printing of macroscopic architectures layer-by-layer offers new opportunities for constructing customized electromagnetic interference (EMI) shielding materials. However, current research primarily focuses on improving the printability of material inks by increasing contents and adding various modifiers, controllable construction of ultralight and robust macro-architectures with structural design at both macro- and micro-scales is still challenging. Herein, we develop a graphene oxide foaming ink enriched with air bubbles for direct-ink writing, enabling the creation of macroscopic graphene architectures with arbitrary geometries.
View Article and Find Full Text PDFFabrication of a poly(m‑aminophenol)/3-aminopropyl triethoxysilane/graphene oxide ternary nanocomposite for removal of Cu(II) from aqueous solution.
Sci Rep
January 2025
Chemistry Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt.
Three composites based on Poly (meta-aminophenol) (PmAP), (3-aminopropyl) triethoxysilane (APTES) and graphene oxide (GO) were synthesized with initial GO dispersion of 3.3, 6.6, and 9.
View Article and Find Full Text PDFCapacitance enhancement by ion-laminated borophene-like layered materials.
Nat Commun
January 2025
Laboratory for Chemistry and Life Science, Institute of Integrated Research, Institute of Science Tokyo, Yokohama, 226-8501, Japan.
Atomically flat two-dimensional networks of boron are attracting attention as post-graphene materials. An introduction of cations between the boron atomic layers can exhibit unique electronic functions that are not achieved by neutral graphene or its derivatives. In the present study, we propose a synthesis strategy for ion-laminated boron layered materials in a solution phase, which enables the preparation of analogs by changing the alkali-metal species.
View Article and Find Full Text PDFData-driven exploration of weak coordination microenvironment in solid-state electrolyte for safe and energy-dense batteries.
Nat Commun
January 2025
Shenzhen Geim Graphene Center, Tsinghua-Berkeley Shenzhen Institute & Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, P. R. China.
The unsatisfactory ionic conductivity of solid polymer electrolytes hinders their practical use as substitutes for liquid electrolytes to address safety concerns. Although various plasticizers have been introduced to improve lithium-ion conduction kinetics, the lack of microenvironment understanding impedes the rational design of high-performance polymer electrolytes. Here, we design a class of Hofmann complexes that offer continuous two-dimensional lithium-ion conduction channels with functional ligands, creating highly conductive electrolytes.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!