Purpose: The aim of this study was to evaluate the mechanical strengths in 5 different designs of orthodontic microimplants by analyzing their configuration of structure.

Materials And Methods: Thirty microimplants of 5 types (diameter 1.5 mm: type A, B, and C; diameter 1.3 mm: type D and E) were assessed. All microimplants were manually driven into the artificial bones at a 7-mm depth. The anchor area (AA), gripping area (GA), insertion torque (IT), Periotest value (PTV), and pullout strength (PS) were measured. Intergroup and intragroup comparisons were used to detect their significant differences.

Results: In the intergroup comparison, type D had a least IT (4.5 Ncm). In the PTV analysis, type B had the largest AA (7.76 mm) and its PTV (1.6) was significantly least than the others. In the PS test, type C had the largest GA (2.40 mm) and its PS was the largest. Intragroup comparisons (IT and PS), type A, and type E presented positively significant correlation. GA revealed positive with PS, and AA showed reverse tendency with PTV.

Conclusion: The more AA of microimplants, the more stable they are. The more GA of microimplants, the more PS they are. Therefore, type C was better than the others because it had the largest GA and second largest AA.

Download full-text PDF

Source
http://dx.doi.org/10.1097/ID.0000000000000765DOI Listing

Publication Analysis

Top Keywords

mechanical strengths
8
orthodontic microimplants
8
type
8
diameter type
8
intragroup comparisons
8
type largest
8
microimplants
6
largest
5
gripping anchoring
4
anchoring effects
4

Similar Publications

Enhanced bone cement for fixation of prosthetic joint utilizing nanoparticles.

J Mater Sci Mater Med

January 2025

Biomedical Engineering Department, Faculty of Engineering, Helwan University, Cairo, Egypt.

Bone cement is commonly utilized to secure prosthetic joints in the body because of its robust fixation, stability, biocompatibility, and immediate load-bearing capability. However, issues such as loosening, leakage, and insufficient bioactivity can lead to its failure. Therefore, improving its mechanical, physical, and biological properties is crucial for enhancing its efficiency.

View Article and Find Full Text PDF

Time-varying intensity of ventilatory inefficiency and mortality in patients with acute respiratory distress syndrome.

Ann Intensive Care

January 2025

Jiangsu Provincial Key Laboratory of Critical Care Medicine, Department of Critical Care Medicine, Zhongda Hospital, School of Medicine, Southeast University, No. 87, Dingjiaqiao Road, Gulou District, Nanjing, 210009, People's Republic of China.

Background: The association between bedside ventilatory parameters-specifically arterial carbon dioxide pressure (PaCO) and ventilatory ratio (VR)-and mortality in patients with acute respiratory distress syndrome (ARDS) remains a topic of debate. Additionally, the persistence of this association over time is unclear. This study aims to investigate the relationship between 28-day mortality in ARDS patients and their longitudinal exposure to ventilatory inefficiency, as reflected by serial measurements of PaCO and VR.

View Article and Find Full Text PDF

Introduction: Spinal cord injury is a physiological disruption often caused by trauma, leading to severe physical and psychological effects, including irreversible impairment and disability. Cervical injuries, particularly between C1 and C8, are the most severe, potentially causing diaphragm paralysis and requiring mechanical ventilation. Reduced respiratory muscle strength not only affects respiratory function but also significantly impacts voice, speech, and communication, which are crucial for quality of life.

View Article and Find Full Text PDF

The high content of vitamin E, including tocopherols and tocotrienols (TCF-TTE), in palm oil () has made it a promising candidate for the alternative treatment of atopic dermatitis (AD). However, the limited solubility of TCF-TTE has restricted its therapeutic efficacy. In this study, pluronic-based micelles (MCs) encapsulating palm oil-derived TCF-TTE were formulated with dissolvable microarray patch-micelles (DMP-MC) using carboxymethyl cellulose (CMC) synthesized from empty fruit bunches of palm to optimize its delivery for AD.

View Article and Find Full Text PDF

Recyclable Millable PolyureThane based on Enaminone Bonds With Upcycled Mechanical Performance.

Macromol Rapid Commun

January 2025

State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing, 100029, China.

Thermoplastic polyurethane (TPU) exhibits re-processable properties, but the properties of TPU is deteriorated during the reprocessing for the oxidation and degradation of polymer chains. Meanwhile, although thermoset polyurethane exhibits excellent mechanical properties, it cannot be recycled for permanent crosslinking. Hence, it's still a challenge to obtain PU which exhibits the balance between the recyclability and mechanical properties.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!