Extracellular polymeric substances (EPS) of microbial sludge play a crucial role in removal of organic micropollutants during biological wastewater treatment. In this study, we examined ciprofloxacin (CIP) removal in three parallel bench-scale reactors using aerobic sludge (AS), anaerobic sludge (AnS), and sulfate-reducing bacteria (SRB) sludge. The results showed that the SRB sludge had the highest specific CIP removal rate via adsorption and biodegradation. CIP removal by EPS accounted up to 35. 6 ± 1.4%, 23.7 ± 0.6%, and 25.5 ± 0.4% of total removal in AS, AnS, and SRB sludge systems, respectively, at influent CIP concentration of 1000 μg/L, which implied that EPS played a critical role in CIP removal. The binding mechanism of EPS on CIP adsorption in three sludge systems were further investigated using a series of batch tests. The results suggested that EPS of SRB sludge possessed stronger hydrophobicity (proteins/polysaccharides (PN/PS) ratio), higher availability of adsorption sites (binding sites ( n)), and higher binding strength (binding constant ( K)) between EPS and CIP compared to those of AS and AnS. The findings of this study provide an insight into the role of EPS in biological process for treating CIP-laden wastewaters.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acs.est.8b00568DOI Listing

Publication Analysis

Top Keywords

cip removal
16
srb sludge
16
sludge systems
12
sludge
11
extracellular polymeric
8
polymeric substances
8
aerobic sludge
8
sludge anaerobic
8
anaerobic sludge
8
sulfate-reducing bacteria
8

Similar Publications

We have developed a novel S-scheme mechanism to expand the photoresponse range of BiSiO. This study reports the successful creation of a CN/BS heterojunction photocatalyst, which is composed of g-CN and BiSiO. The synthesis was achieved through a simple two-step procedure, involving hydrothermal treatment and subsequent calcination.

View Article and Find Full Text PDF

In this study, the adsorption of aqueous Cu(Ⅱ), Fe(Ⅱ), and Co(Ⅱ) on biochars at diverse synthesized temperatures was evaluated. The optimal sample BC-800 achieved superior adsorption performance of Cu(Ⅱ), Fe(Ⅱ), and Co(Ⅱ) at 10-50 mg L initial concentration. Due to the larger surface area (349.

View Article and Find Full Text PDF

The photocatalytic efficiency of TiO has been opposed by the fast recombination speed of photogenerated carriers. Here, g-CN -modified sulfate-built-in TiO quantum dots (ST-QDs) were successfully created using a simple ultrasonication-thermal procedure. g-CN-enrapped ST QDs with a 10 nm size were revealed by the characterization results.

View Article and Find Full Text PDF

Zeolite-like algal biochar nanoparticles for enhanced antibiotics removal: Sorption mechanisms and theoretical calculations.

Colloids Surf B Biointerfaces

December 2024

National Engineering Research Center for Marine Aquaculture, Zhejiang Ocean University, Zhoushan, Zhejiang 316022, China.

In the study, Sargassum horneri (S. horneri) was used to create a novel zeolite-like algal biochar (KSBC). KSBC with doping of N, O, S, Al, and Si, displayed zeolite-like properties, including well-developed porosity, a high specific surface area (1137.

View Article and Find Full Text PDF

Researchers in the field of photocatalysis are interested in finding a solution to the problem of charge transfer and recombination in photodegradation mechanisms. The ideal photoactive catalyst would be inexpensive, environmentally friendly, easily manufactured, and highly efficient. Graphitic carbon nitride (g-CN) and metal oxide (MOx) based nanocomposites (g-CN/MOx) are among the photocatalysts that provide the best results in terms of charge transfer capacity, redox capabilities, and charge recombination inhibition.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!