Efficient removal of benzene in air at atmospheric pressure using a side-on type 172 nm Xe excimer lamp.

The photochemical removal of benzene was studied in air at atmospheric pressure using a side-on type 172 nm Xe excimer lamp with a wide irradiation area. After 1.5 min photoirradiation, CH (1000 ppm) in air was completely converted to HCOOH, CO, and CO at a total flow rate of 1000 mL/min. The initial decomposition rate of CH was determined to be 1.18 min. By using a flow system, CH (200 ppm) was completely removed at a total flow rate of 250 mL/min. The conversion of CH and the energy efficiency in the removal of CH changed in the 31-100% and 0.48-1.2 g/kWh range, respectively, depending on the flow rate, the O concentration, and the chamber volume. On the basis of kinetic model simulation, dominant reaction pathways were discussed. Results show that the O(P) + CH reaction plays a significant role in the initial stage of the CH decomposition. Important experimental parameters required for further improvement of the CH removal apparatus using a 172 excimer lamp were discussed based on model calculations.