Multi-Response Optimization of Ultrasonic Assisted Enzymatic Extraction Followed by Macroporous Resin Purification for Maximal Recovery of Flavonoids and Ginkgolides from Waste Fallen Leaves.

In the present study, the process of ultrasonic assisted enzymatic extraction (UAEE), followed by macroporous resin purification, was successfully developed to achieve maximal recovery of flavonoids and ginkgolides from fallen leaves (GBFL). Three effective extracted factors, including UAE power, EtOH%, and the amount of cellulase were screened by Plackett⁻Burman design (PBD). The important variables were further optimized by rotatable central composite design (RCCD). After the combination of PBD and RCCD, the resulting optimal UAEE conditions were as follows: UAE power of 218 W; EtOH% of 68%; the amount of cellulase of 8.4 mg; UAE temperature of 40 °C; UAE time of 20 min; pH of 5.0; and, sample particle size of 40 mesh. Under the optimum conditions; the yields of flavonoids were 0.74 ± 0.05% ( = 3) and ginkgolides was 0.42 ± 0.06% ( = 3), which were close to the predicted values. Moreover, the further enriching flavonoids and ginkgolides from the obtained GBFL extracts using the above optimum UAEE condition was successfully achieved by macroporous resin DA-201. After column adsorption and desorption on DA-201; the percentage of total flavonoids was (25.36 ± 1.03)%; ginkgolides was (12.43 ± 0.85)% and alkylphenols was (0.003 ± 0.0005)% from the obtained dry extracts of GBFL which were complied with Chinese pharmacopoeias. Therefore, the present study provided a convenient and efficient method for extraction and purification of flavonoids and ginkgolides from waste GBFL.