Background The endovascular approach became an alternative to open surgical treatment of popliteal artery aneurysm over the last few years. Heparin-bonded stent-grafts have been employed for endovascular popliteal artery aneurysm repair, showing good and stable results. Only few reports about the use of multilayer flow modulator are available in literature, providing small patient series and short follow-up. The aim of this study is to report the outcomes of patients with popliteal artery aneurysm treated with the multilayer flow modulator in three Italian centres. Methods We retrospectively analysed a series of both symptomatic and asymptomatic patients with popliteal artery aneurysm treated with the multilayer flow modulator from 2009 to 2015. Follow-up was undertaken with clinical and contrast-enhanced ultrasound examinations at 1, 6 and 12 months, and yearly thereafter. Computed tomography angiography was performed in selected cases. Primary endpoints were aneurysm sac thrombosis; freedom from sac enlargement and primary, primary-assisted and secondary patency during follow-up. Secondary endpoints were technical success, collateral vessels patency, limb salvage and aneurysm-related complications. Results Twenty-three consecutive patients (19 males, age 72 ± 11) with 25 popliteal artery aneurysms (mean diameter 23 mm ± 1, 3 symptomatic patients) were treated with 40 multilayer flow modulators during the period of the study. Median follow-up was 22.6 ± 16.7 months. Complete aneurysm thrombosis occurred in 92.9% of cases (23/25 cases) at 18 months. Freedom from sac enlargement was 100% (25/25 cases) with 17 cases of aneurysm sac shrinkage (68%). At 1, 6, 12 and 24 months, estimated primary patency was 95.7%, 87.3%, 77% and 70.1%, respectively. At the same intervals, primary-assisted patency was 95.7%, 91.3%, 86% and 86%, respectively, and secondary patency was 100%, 95.7%, 90.3% and 90.3%, respectively. Technical success was 100%. The collateral vessels patency was 72.4%. Limb salvage was 91.4% at 24-month follow-up. One multilayer flow modulator fracture was reported in an asymptomatic patient. Conclusions Multilayer flow modulator seems a feasible and safe solution for endovascular treatment of popliteal artery aneurysms in selected patients.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1177/1708538118771258 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Application of multilayered porous media for heat transfer optimization in double pipe heat exchangers using neural network and NSGA II.
Sci Rep
December 2024
Department of Mechanical Engineering, Qom University of Technology, Qom, 37195-1519, Iran.
This study investigates the use of multi-layered porous media (MLPM) to enhance thermal energy transfer within a counterflow double-pipe heat exchanger (DPHE). We conducted computational fluid dynamics (CFD) simulations on DPHEs featuring five distinct MLPM configurations, analyzed under both fully filled and partially filled conditions, alongside a conventional DPHE. The impact of various parameters such as porous layer arrangements, thickness, and flow Reynolds numbers on pressure drop, logarithmic mean temperature difference (LMTD), and performance evaluation criterion (PEC) was assessed.
View Article and Find Full Text PDFDesign, additive manufacturing, and characterization of an organ-on-chip microfluidic device for oral mucosa analogue growth.
J Mech Behav Biomed Mater
December 2024
Department of Prosthodontics, Dental and Craniofacial Bioengineering and Applied Biomaterials, School of Dentistry, Faculty of Health Sciences, Aristotle University of Thessaloniki, Thessaloniki, 54124, Greece. Electronic address:
Introduction: Α customized organ-on-a-chip microfluidic device was developed for dynamic culture of oral mucosa equivalents (Oral_mucosa_chip-OMC).
Materials And Methods: Additive Manufacturing (AM) was performed via stereolithography (SLA) printing. The dimensional accuracy was evaluated via microfocus computed tomography (mCT), the surface characteristics via scanning electron microscopy (SEM), while the mechanical properties via nanoindentation and compression tests.
ST-GMLP: A concise spatial-temporal framework based on gated multi-layer perceptron for traffic flow forecasting.
Neural Netw
December 2024
School of Rail Transportation, Soochow University, Suzhou 215131, China; Intelligent Urban Rail Engineering Research Center of Jiangsu Province, Suzhou 215131, China. Electronic address:
The field of traffic forecasting has been the subject of considerable attention as a critical component in alleviating traffic congestion and improving urban services. Given the regular patterns of human activities, it is evident that traffic flow is inherently periodic. However, most of existing studies restrict themselves to recent historical observations and typically yield structurally and computationally complex models, which greatly limits the forecasting accuracy and hinders the application of models in realistic situations.
View Article and Find Full Text PDFThe bulk photovoltaic effect (BPVE) and its artificial variant generate photocurrent under zero external bias in non-centrosymmetric systems, particularly in on-chip miniaturized metasurface-based photodetectors. Despite significant advancements, enhancing the efficiency of local photocurrent collection remains a challenge, often impeded by non-uniform flow fields in graphene caused by nanoantenna contacts, which lead to carrier transport losses. In this study, we conducted a comprehensive investigation into the regulation of local photocurrent collection in zero-bias optoelectronic metasurface-based photodetectors and explored the impact of nanoantenna array configurations on photocurrent efficiency.
View Article and Find Full Text PDFEncapsulation of AD-MSC- derived extracellular nanovesicles in an electrospun three-layer scaffold: characterization and controlled release analysis in vitro.
Biomed Mater
December 2024
Shaheed Beheshti University of Medical Sciences, No 53 west ghobadian street, Tehran, 1516745811, Iran (the Islamic Republic of).
The combining of therapeutic agents with electrospun nanofibers boosts their regeneration potential; therefore, Researchers have increasingly turned towards the development of electrospun nanofiber scaffolds to encapsulate or surface-adsorb biological payloads, such as cytokines, exosomes, peptides, nucleic acids, and enzymes. Due to their high surface-to-volume ratio, ease of manufacturing, and drug-loading capacity, electrospun nanofibers are hopeful in tissue engineering and scaffold fabrication. Electrospun multilayer scaffolds offer a promising construction for preserving the integrity and bioactivity of therapeutic factors while permitting the controlled and prolonged release of biomolecules into the environment.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!