A Comparison of Image Quality and Radiation Exposure Between the Mini C-Arm and the Standard C-Arm.

Hand (N Y)

Department of Plastic and Reconstructive Surgery, Leeuwarden, The Netherlands.

Published: November 2019

The use of intraoperative fluoroscopy has become mandatory in osseous hand surgery. Due to its overall practicality, the mini C-arm has gained popularity among hand surgeons over the standard C-arm. This study compares image quality and radiation exposure for patient and staff between the mini C-arm and the standard C-arm, both with flat panel technology. An observer-based subjective image quality study was performed using a contrast detail (CD) phantom. Five independent observers were asked to determine the smallest circles discernable to them. The results were plotted in a graph, forming a CD curve. From each curve, an image quality figure (IQF) was derived. A lower IQF equates to a better image quality. The patients' entrance skin dose was measured, and to obtain more information about the staff exposure dose, a perspex hand phantom was used. The scatter radiation was measured at various distances and angles relative to a central point on the detector. The IQF was significantly lower for the mini C-arm resulting in a better image quality. The patients' entrance dose was 10 times higher for the mini C-arm as compared with the standard C-arm, and the scatter radiation threefold. Due to its improved image quality and overall practicality, the mini C-arm is recommended for hand surgical procedures. To ensure that the surgeons' radiation exposure is not exceeding the safety limits, monitoring radiation exposure using mini C-arms with flat panel technology during surgery should be done in a future clinical study.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6900691PMC
http://dx.doi.org/10.1177/1558944718770210DOI Listing

Publication Analysis

Top Keywords

image quality
28
mini c-arm
24
radiation exposure
16
standard c-arm
16
c-arm
10
quality radiation
8
exposure mini
8
c-arm standard
8
practicality mini
8
flat panel
8

Similar Publications

Multi-modal systems extract information about the environment using specialized sensors that are optimized based on the wavelength of the phenomenology and material interactions. To maximize the entropy, complementary systems operating in regions of non-overlapping wavelengths are optimal. VIS-IR (Visible-Infrared) systems have been at the forefront of multi-modal fusion research and are used extensively to represent information in all-day all-weather applications.

View Article and Find Full Text PDF

Optimizing Correction Factors on Color Differences for Automotive Painting Services.

Sensors (Basel)

December 2024

Department of Management and Industrial Engineering, University of Petrosani, 332003 Petrosani, Romania.

Currently, the automotive sector is showing increased demands regarding the color of cars in general, but especially the quality and the time of painting, in particular. Companies working in this industry, especially in specialized painting services, must perform work of impeccable quality in the shortest possible time in order to be efficient. Color differences that appear in different areas of the car result from the use of different formulas for obtaining color.

View Article and Find Full Text PDF

A WSN and LoRa Hybrid Multimedia Transmission Protocol for Scalar Data and Image Transmission.

Sensors (Basel)

December 2024

Ubicom Laboratory, Department of Electrical, Electronic and Computer Engineering, University of Ulsan, Ulsan 44610, Republic of Korea.

The proposed protocol features reliable and fast image transmission while periodically transmitting scalar data without interruption by allowing two networks, a LoRa network and a wireless sensor network, with different transmission characteristics to cooperate. It adopts the RT-LoRa protocol for periodic scalar data transmission and uses a WSN-based pipelined transmission method that leverages single-hop message transmission of a LoRa network for image transmission. Thus, it can not only eliminate the control message overhead for time synchronization, slot scheduling, and path establishment for pipelined image transmission in WSNs but also eliminate interferences within WSNs, such as data collisions and data and message collisions, during pipelined image transmission, thereby enabling high reliability and fast transmission.

View Article and Find Full Text PDF

To achieve high-precision 3D reconstruction, a comprehensive improvement has been made to the binocular structured light calibration method. During the calibration process, the calibration object's imaging quality and the camera parameters' nonlinear optimization effect directly affect the caibration accuracy. Firstly, to address the issue of poor imaging quality of the calibration object under tilted conditions, a pixel-level adaptive fill light method was designed using the programmable light intensity feature of the structured light projector, allowing the calibration object to receive uniform lighting and thus improve the quality of the captured images.

View Article and Find Full Text PDF

Advancements in Raman light sheet microscopy have provided a powerful, non-invasive, marker-free method for imaging complex 3D biological structures, such as cell cultures and spheroids. By combining 3D tomograms made by Rayleigh scattering, Raman scattering, and fluorescence detection, this modality captures complementary spatial and molecular data, critical for biomedical research, histology, and drug discovery. Despite its capabilities, Raman light sheet microscopy faces inherent limitations, including low signal intensity, high noise levels, and restricted spatial resolution, which impede the visualization of fine subcellular structures.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!