Models mimicking the realistic geometries and mechanical properties of human tissue are requiring ever-better materials. Biomodels made of poly (vinyl alcohol) are particularly in demand, as they can be used to realistically reproduce the characteristics of blood vessels. The reproducibility of biomodels can be altered due to dehydration that is observed after long periods of usage. In order to improve their usability, one should consider the method used to reproduce them; however, few studies have reported a method reproduce biomodels. This study proposes a novel reproduction method for biomodels that allows them to quickly and easily reproduce their geometric and mechanical properties. Specimens of the dried biomodels were reformed through immersion in temperature-controlled water. Our results show that water at 35 °C can be effective to reproduce both the geometric and mechanical properties of the specimens. X-ray diffraction (XRD) measurements revealed that water immersion can reform the crystal structure of the pre-dried specimens, and images obtained using micro-computed tomography acquisition show that the geometry of the specimens can be reformed by water immersion without introducing any defects. These results indicate that the proposed method can lead to high reproducibility of both the original geometric and mechanical properties of the dried biomodels.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5893614 | PMC |
| http://dx.doi.org/10.1038/s41598-018-24235-z | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Insights into the localized corrosion initiation mechanisms of alloy 718.
Heliyon
January 2025
Max Planck Institute for Sustainable Materials, Max-Planck-Straße 1, 40237, Düsseldorf, Germany.
Nickel alloys are widely used in the oil and gas industry where high corrosion resistance in chloride water or in sour environments is required. When high mechanical properties are required in combination with high corrosion properties, alloy 718 (UNS N07718) is one of the preferred choices, although it still presents limitations in terms of corrosion resistance in some applications: despite offering outstanding resistance to localized corrosion, alloy 718 is not immune to it. Its high corrosion resistance is mainly due to its high nickel and chromium contents combined with additions of molybdenum and other noble elements.
View Article and Find Full Text PDFLong-term performance and durability of lime-stabilized oil-contaminated soils.
Heliyon
January 2025
Department of Geology, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran.
In oil-rich regions, the increasing risk of oil spills on soil is largely attributed to intensified extraction and transportation activities. This situation necessitates a focus on the short-term and long-term strength of contaminated soils. While existing literature primarily evaluates the oil-contaminated soils over short-term periods, typically up to 28 days, it is essential to investigate their long-term performance, extending the evaluation period to 365 days.
View Article and Find Full Text PDFDetermination of the degree of sulfonation in cross-linked and non-cross-linked Poly(ether ether ketone) using different analytical techniques.
Heliyon
January 2025
Division of Polymer Chemistry, Department of Chemistry, Atomic Energy Commission, P.O. Box: 6091, Damascus, Syrian Arab Republic.
The degree of sulfonation (DS) is a key property of sulfonated polymers, as it significantly influences their swelling behaviour, conductivity and mechanical properties. Accurately determining the DS is essential for optimizing these materials for various applications. In this work, the DS of sulfonated poly (ether ether ketone) (SPEEK) was evaluated using a combination of analytical techniques, including titration, back titration, Fourier Transform Infrared (FTIR), Ultra-Violet (UV) and proton nuclear magnetic resonance (H NMR) spectroscopies, Thermogravimetric analysis (TGA), Rutherford backscattering (RBS) and particle induced X-ray emission (PIXE) analysis.
View Article and Find Full Text PDFStress relief treatment of aluminum/magnesium laminates fabricated by roll bonding technique.
Heliyon
January 2025
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran.
Roll bonding of aluminum/magnesium laminates combines the good corrosion resistance of aluminum alloys with the beneficial mechanical properties of magnesium alloys. We studied the microstructure of aluminum Al-1051/AZ31 magnesium laminates fabricated by the roll-bonding process. The fabricated laminates were investigated in the as-fabricated condition and after subsequent stress relief annealing treatment at temperatures ranging from 200 °C to 400 °C.
View Article and Find Full Text PDFOptimizing woodcutting with zirconia-toughened alumina: Processing, performance, and industrial insights.
Heliyon
January 2025
Swiss Federal Laboratories for Materials Science and Technology (Empa), Laboratory for High Performance Ceramics, 8600, Dübendorf, CH, Switzerland.
Since the 1950s, the woodcutting industry has relied heavily on tungsten carbide (WC) cutting tools to overcome the challenges posed by the complex structure of wood, including hard knots and abrasive elements such as sand and tannic acids. These demands require cutting tools with superior thermal conductivity and mechanical properties. However, the rising cost of WC materials has prompted the search for alternative solutions.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!