Hollow carbon dots labeled with FITC or TRITC for use in fluorescent cellular imaging.

Mikrochim Acta

Key Laboratory of Luminescent and Real-Time Analytical Chemistry (Southwest University), Ministry of Education, College of Chemistry and Chemical Engineering, Southwest University, Chongqing, 400715, People's Republic of China.

Published: March 2018

Hollow carbon dots (HCDs) were prepared by a solvothermal method and conjugated to either tetramethyl rhodamine isothiocyanate (TRITC) or fluorescein-5-isothiocyanate (FITC). This resulted in HCDs with bright red or green fluorescence, with excitation/emission peaks at 550/580 and 491/520 nm, respectively. The nanocomposites are well water-soluble, remarkably photostable and biocompatible. In addition, the fluorescence of the composites is more stable in a reactive oxygen environment than the free dyes. Confocal images indicate that the nanoparticles quickly enter A549 cells and mainly accumulate in the cytoplasm. The wavelength of functionalized HCDs can be regulating via coupling the HCDs to different dyes. These results demonstrate that these composite materials can be very promising reagents for biological labeling and imaging. Graphical abstract Schematic of the preparation of hollow carbon dots conjugated to tetramethyl rhodamine isothiocyanate (RHCDs) by solvothermal method. The material is water-soluble, remarkably photostable and biocompatible. It was applied to cellular labeling and imaging.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s00604-018-2761-2DOI Listing

Publication Analysis

Top Keywords

hollow carbon
12
carbon dots
12
solvothermal method
8
conjugated tetramethyl
8
tetramethyl rhodamine
8
rhodamine isothiocyanate
8
water-soluble remarkably
8
remarkably photostable
8
photostable biocompatible
8
labeling imaging
8

Similar Publications

Carbon-supported Pt-based catalysts are the most effective catalysts for direct methanol fuel cells (DMFCs). However, challenges such as high Pt loading, cost, and susceptibility to CO poisoning severely hinder the development of DMFCs. In this paper, CoFeO@polymer@ZIF-67 is prepared successfully through sequential solution polymerization and in situ growth with modified CoFeO as the core.

View Article and Find Full Text PDF

Efficient Electrosynthesis of Hydrogen Peroxide Enabled by a Hierarchical Hollow RE-P-O (RE = Sm, La, Gd) Architecture with Open Channels.

Adv Mater

January 2025

Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Soochow University, 199 Ren'ai Road, Suzhou, Jiangsu, 215123, China.

The electrochemical two-electron oxygen reduction reaction (2e ORR) offers a sustainable pathway for the production of HO; however, the development of electrocatalysts with exceptional activity, selectivity, and long-term stability remains a challenging task. Herein, a novel approach is presented to addressing this challenge by synthesizing hierarchical hollow SmPO nanospheres with open channels via a two-step hydrothermal treatment. The produced compound demonstrates remarkable 2e selectivity, exceeding 93% across a wide potential range of 0.

View Article and Find Full Text PDF

Electronic and vacancy engineering of ruthenium doped hollow-structured NiO/CoO nanoreactors for low-barrier electrochemical urea-assisted energy-saving hydrogen production.

J Colloid Interface Sci

December 2024

State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, Xinjiang, PR China. Electronic address:

Discovering a valid approach to achieve a novel and efficient water splitting catalyst is essential for the development of hydrogen energy technology. Herein, unique hollow-structured ruthenium (Ru)-doped nickel-cobalt oxide (Ru-NiO/CoO/NF) nanocube arrays are fabricated as high-efficiency bifunctional electrocatalysts for hydrogen evolution reaction (HER)/urea oxidation reaction (UOR) through combined electronic and vacancy engineering. The structural characterization and experimental results indicate that the doping of Ru can not only effectively modulate the electronic structure of Ru-NiO/CoO/NF, but also increase the content of oxygen vacancies in the structure of Ru-NiO/CoO/NF to stabilize the existence of oxygen vacancies during the catalytic process.

View Article and Find Full Text PDF

Suboptimal spatial utilization and inefficient access to internal porosity preclude porous carbon cathodes from delivering high energy density in zinc-ion hybrid capacitors (ZIHCs). Inspired by the function of capillaries in biological systems, this study proposes a facile coordination-pyrolysis method to fabricate thin-walled hollow carbon nanofibers (CNFs) with optimized pore structure and surface functional groups for ZHICs. The capillary-like CNFs maximize the electrode/electrolyte interface area, facilitating the optimal utilization of energy storage sites.

View Article and Find Full Text PDF

Multi-heterointerface charge transfer in amine-functionalized cadmium sulfide-copper sulfide@titanium dioxide hollow spheres with rich oxygen vacancies for carbon dioxide photoreduction.

J Colloid Interface Sci

December 2024

Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, Heilongjiang University, Harbin 150080, PR China. Electronic address:

Photocatalytically reducing CO into high-value-added chemical materials has surfaced as a viable strategy for harnessing solar energy and mitigating the greenhouse effect. But the inadequate separation of the photogenerated electron-hole pair remains a major obstacle to CO photoreduction. Constructing heterostructure photocatalysts with efficient interface charge transfer is a promising approach to solving the above problems.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!