Response Surface Methodology was used for optimizing operating variables for a multi-frequency ultrasound reactor using BP-3 as a model compound. The response variable was the Triclosan degradation percent after 10 sonication min. Frequency at levels from 574, 856 and 1134 kHz were used. Power density, pulse time (PT), silent time (ST) and PT/ST ratio effects were also analyzed. 2 and 2 experimental designs were used for screening purposes and a central composite design was used for optimization. An optimum value of 79.2% was obtained for a frequency of 574 kHz, a power density of 200 W/L, and a PT/ST ratio of 10. Significant variables were frequency and power level, the first having an optimum value after which degradation decreases while power density level had a strong positive effect on the whole operational range. PT, ST, and PT/ST ratio were not significant variables although it was shown that pulsed mode ultrasound has better degradation rates than continuous mode ultrasound; the effect less significant at higher power levels.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ultsonch.2017.10.014 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Neuropathic corneal pain following refractive surgery: risk factors, clinical manifestations, imaging and proteomic characteristics.
Br J Ophthalmol
January 2025
Tissue Engineering and Cell Therapy Group, Singapore Eye Research Institute, Singapore
Background/aims: To identify the risk factors for neuropathic corneal pain (NCP) following corneal refractive surgery and to report its clinical manifestations, imaging and proteomic characteristics.
Methods: This 1 year prospective cohort study included 100 eyes that underwent small incision lenticule extraction (SMILE) or laser-assisted in situ keratomileusis (LASIK). Ocular surface assessments, in-vivo confocal microscopy scans, tear neuromediators and proteomics analyses were performed.
Selective Undercut of Undoped Optical Membranes for Spin-Active Color Centers in 4H- Silicon Carbide.
ACS Nano
January 2025
John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138, United States.
Silicon carbide (SiC) is a semiconductor used in quantum information processing, microelectromechanical systems, photonics, power electronics, and harsh environment sensors. However, its high-temperature stability, high breakdown voltage, wide bandgap, and high mechanical strength are accompanied by a chemical inertness, which makes complex micromachining difficult. Photoelectrochemical (PEC) etching is a simple, rapid means of wet processing SiC, including the use of dopant-selective etch stops that take advantage of the mature SiC homoepitaxy.
View Article and Find Full Text PDFMultifunctional UV photodetect-memristors based on area selective fabricated GaS/graphene/GaN van der Waals heterojunctions.
Mater Horiz
January 2025
School of Materials Scicence and Engineering, South China University of Technology, Guangzhou, 510640, China.
Multifunctional devices based on van der Waals heterojunctions have drawn significant attention owing to their portable size, low power consumption and various application scenarios. However, high fabrication equipment requirements, complex device structures and limited operating conditions hinder their potential value. Herein, multifunctional UV photodetect-memristors based on GaS/graphene/GaN van der Waals heterojunctions area selective deposition have been proposed for the first time.
View Article and Find Full Text PDFEstimating in vivo power deposition density in thermotherapies based on ultrasound thermal strain imaging.
J Acoust Soc Am
January 2025
Key Laboratory of Modern Acoustics (MOE), School of Physics, Collaborative Innovation Centre of Advanced Microstructures, Nanjing University, Nanjing 210093, China.
In thermal therapies, accurate estimation of in-tissue power deposition density (PDD) is essential for predicting temperature distributions over time or regularizing temperature imaging. Based on our previous work on ultrasound thermometry, namely, multi-thread thermal strain imaging (MT-TSI), this work develops an in vivo PDD estimation method. Specifically, by combining the TSI model infinitesimal echo strain filter with the bio-heat transfer theory (the Pennes equation), a finite-difference time-domain model is established to allow online extraction of the PDD.
View Article and Find Full Text PDFDesign a functional graphene with decoration of dual transition metal dopants for hydrogen evolution electrocatalysis.
Chemphyschem
January 2025
School of Energy and Power, New Energy, 02 Mengxi Street, 212003, Zhenjiang, CHINA.
Since hydrogen is a promising alternative to fossil fuels due to its high energy density and environmental friendliness, water electrolysis for hydrogen production has received widespread attentions wherein the development of active and stable catalytic materials is a key research direction. This article designs a dual transition metal doped functional graphene for hydrogen evolution reaction via density functional theory calculations. Among varied combinations, 16 candidates are screened out that are expected to be stable as reflected by the criterion of formation energy Ef < 0 and active due to its free energy of hydrogen adsorption ∆GH within the window of ±0.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!