Objectives: To study the ratio of ablation zone volume to applied energy in computed tomography (CT)-guided radiofrequency ablation (RFA) and microwave ablation (MWA) in patients with hepatocellular carcinoma (HCC) in a cirrhotic liver and in patients with colorectal liver metastasis (CRLM).
Methods: In total, 90 liver tumors, 45 HCCs in a cirrhotic liver and 45 CRLMs were treated with RFA or with one of two MWA devices (MWA_A and MWA_B), resulting in 15 procedures for each tumor type, per device. Device settings were recorded and the applied energy was calculated. Ablation volumes were segmented on the contrast-enhanced CT scans obtained 1 week after the procedure. The ratio of ablation zone volume in milliliters to applied energy in kilojoules was determined for each procedure and compared between HCC (R) and CRLM (R), stratified according to ablation device.
Results: With RFA, R and R were 0.22 mL/kJ (0.14-0.45 mL/kJ) and 0.15 mL/kJ (0.14-0.22 mL/kJ; p = 0.110), respectively. With MWA_A, R was 0.81 (0.61-1.07 mL/kJ) and R was 0.43 (0.35-0.61 mL/kJ; p = 0.001). With MWA_B, R was 0.67 (0.41-0.85 mL/kJ) and R was 0.43 (0.35-0.61 mL/kJ; p = 0.040).
Conclusions: With RFA, there was no significant difference in energy deposition ratio between tumor types. With both MWA devices, the ratios were higher for HCCs. Tailoring microwave ablation device protocols to tumor type might prevent incomplete ablations.
Key Points: • HCCs and CRLMs respond differently to microwave ablation • For MWA, CRLMs required more energy to achieve a similar ablation volume • Tailoring ablation protocols to tumor type might prevent incomplete ablations.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6028841 | PMC |
http://dx.doi.org/10.1007/s00330-017-5266-1 | DOI Listing |
Int J Obes (Lond)
January 2025
Department of Health, Kinesiology, and Applied Physiology, Concordia University, Montreal, QC, Canada.
Objective: Compared to adulthood-onset obesity (AO), those with childhood-onset obesity (CO) are at greater risk of metabolic disease. However, the differences between these two obesity phenotypes are not clear. The aim of this study is to investigate how the age of obesity onset (CO vs.
View Article and Find Full Text PDFLangmuir
January 2025
Materials Chemistry Department, CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha 751013, India.
Due to the high cost of the available Pt electrocatalysts, the large-scale water electrolysis production of hydrogen has been hindered. Hydrogen generation via electrochemical water splitting is a renewable energy essential to a sustainable society, creating a distinct material interface that shows Pt-like properties with long-term stability crucial to hydrogen evolution reactions (HERs). Here, we synthesized the guanine-assisted facile synthesis of 1 wt % Pt/MoC/C having a layered type morphology via solid state calcined process followed by chemical reduction.
View Article and Find Full Text PDFComput Biol Med
January 2025
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran. Electronic address:
Atherogenesis is prone in medium and large-sized vessels, such as the aorta and coronary arteries, where hemodynamic stress is critical. Low and oscillatory wall shear stress contributes significantly to endothelial dysfunction and inflammation. Murray's law minimizes energy expenditure in vascular networks and applies to small arteries.
View Article and Find Full Text PDFCommun Eng
January 2025
School of Computer Science and Engineering, Sun Yat-sen University, Guangzhou, China.
Large-scale optimal design problems involving nonlinear differential equations are widely applied in modeling such as craft manufacturing, chemical engineering and energy engineering. Herein we propose a fast and flexible holomorphic embedding-based method to solve nonlinear differential equations quickly, and further apply it to handle the industrial application of reverse osmosis desalination. Without solving nonlinear differential equations at each discrete point by a traditional small-step iteration approach, the proposed method determines the solution through an approximation function or approximant within segmented computational domain independently.
View Article and Find Full Text PDFSci Rep
January 2025
Department of Theoretical Electrical Engineering and Diagnostics of Electrical Equipment, Institute of Electrodynamics, National Academy of Sciences of Ukraine, Beresteyskiy, 56, Kyiv-57, Kyiv, 03680, Ukraine.
Off-grid water pumping systems (OGWPS) have become an increasingly popular area of research in the search for sustainable energy solutions. This paper presents a finite element method (FEM)-based design and analysis of Brushless-DC (BLDC) and Switched Reluctance Motors (SRM) designed for low-power water pumping applications. Utilizing adaptive finite element analysis (FEA), both motors were designed with identical ratings and design parameters to ensure a fair comparison.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!