The performance of highly nonlinear organic electro-optic (EO) materials incorporated into nanoscale slots is examined. It is shown that EO coefficients as large as 190 pm/V can be obtained in 150 nm wide plasmonic slot waveguides but that the coefficients decrease for narrower slots. Possible mechanism that lead to such a decrease are discussed. Monte-Carlo computer simulations are performed, confirming that chromophore-surface interactions are one important factor influencing the EO coefficient in narrow plasmonic slots. These highly nonlinear materials are of particular interest for applications in optical modulators. However, in modulators the key parameters are the voltage-length product UL and the insertion loss rather than the linear EO coefficients. We show record-low voltage-length products of 70 Vµm and 50 Vµm for slot widths in the order of 50 nm for the materials JRD1 and DLD164, respectively. This is because the nonlinear interaction is enhanced in narrow slot and thereby compensates for the reduced EO coefficient. Likewise, it is found that lowest insertion losses are observed for slot widths in the range 60 to 100 nm.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/OE.25.002627 | DOI Listing |
Sci Adv
December 2024
Nano-Cybernetic Biotrek, Media Lab, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
Chempluschem
November 2024
Department of Chemistry, City University of Hong Kong, Hong Kong SAR, China.
The research and development of push-pull tetraene chromophores (PPT-phores) have contributed greatly to the field of organic electro-optic (EO) materials and devices since the inauguration of CLD-1 in 2001. This study is thus a systematic contribution to synthesize and characterize a series of centro-arylated PPT-phores based on strong electron-donating tetrahydroquinolinyl groups and variable strong electron-accepting tricyanofuran derivatives. In particular, we report the crystallographic data to show various packing modes of these PPT-phores with detailed information about bond length alternation and intermolecular interactions, the optical absorption edges of guest-host polymers by the Tauc model, and the anisotropy and dispersion of Pockels tensors for the poled polymers by attenuated total reflection spectroscopy.
View Article and Find Full Text PDFACS Photonics
July 2024
Institute of Electromagnetic Fields, ETH Zurich, 8092 Zurich, Switzerland.
Cryogenic quantum applications have a demand for an ever-higher number of interconnects and bandwidth. Photonic links are foreseen to offer data transfer with high bandwidth, low heat load, and low noise to enable the next-generation scalable quantum computing systems. However, they require high-speed and energy-efficient modulators operating at cryogenic temperatures for electro-optic signal conversion.
View Article and Find Full Text PDFMolecules
July 2024
School of Chemistry and Chemical Engineering, Guangzhou University, Guangzhou 510006, China.
The preparation of high-performance electro-optical materials is one of the key factors determining the application of optoelectronic communication technology such as 5G communication, radar detection, terahertz, and electro-optic modulators. Organic electro-optic materials have the advantage of a high electro-optic coefficient (~1000 pm/V) and could allow the utilization of photonic devices for the chip-scale integration of electronics and photonics, as compared to inorganic electro-optic materials. However, the application of organic nonlinear optical materials to commercial electro-optic modulators and other fields is also facing technical bottlenecks.
View Article and Find Full Text PDFRSC Adv
June 2024
College of Science, University of Shanghai for Science and Technology Shanghai China
In this work, we fabricate a series of full-fluorescent organic light-emitting diodes (OLEDs) with the thermally activated delayed fluorescence (TADF) exciplex emitter in order to improve the efficiency through the reverse intersystem crossing (RISC) process. The TADF exciplex emitters are made up of a mixture of P-type materials (DMAC-DPS and mCBP) and n-type material (PO-T2T), among which DMAC-DPS also classes as a TADF material. The change in doping concentration will affect the intermolecular distance and the composition of TADF material and two kinds of exciplexes (DMAC-DPS:PO-T2T and mCBP:PO-T2T) in the luminescent layer (EML).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!