Purpose: The purpose of this study was to analyze the effects of two different implant surface treatments on initial bone connection by comparing the Removal Torque Values (RTQs) at 7 and 10 days after chemically modified, sandblasted, large-grit and acid-etched (modSLA), and Laser-etched (LE) Ti implant placements.
Materials And Methods: Twenty modSLA and 20 LE implants were installed on the left and right tibias of 20 adult rabbits. RTQs were measured after 7 and 10 days in 10 rabbits each. Scanning electron microscope (SEM) photographs of the two implants were observed by using Quanta FEG 650 from the FEI company (Hillsboro, OR, USA). Analyses of surface elements and components were conducted using energy dispersive spectroscopy (EDS, Horiba, Kyoto, Japan).
Results: The mean RTQs were 12.29 ± 0.830 and 12.19 ± 0.713 Ncm after 7 days (=.928) and 16.47 ± 1.324 and 16.17 ± 1.165 Ncm after 10 days (=.867) for LE and modSLA, respectively, indicating no significant inter-group differences. Pore sizes in the LE were 40 µm and consisted of numerous small pores, whereas pore sizes in the modSLA were 5 µm. In the EDS analysis, Ti, O, and C were the only three elements found in the LE surfaces. Na, Ca, Cl, and K were also observed in modSLA, in addition to Ti, O, and C.
Conclusion: The implants showed no significant difference in biomechanical bond strength to bone in early-stage osseointegration. LE implant can be considered an excellent surface treatment method in addition to the modSLA implant and can be applied to the early loading of the prosthesis clinically.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5829290 | PMC |
| http://dx.doi.org/10.4047/jap.2018.10.1.73 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Bonding super translucent multilayered monolithic zirconia to different foundation materials: an invitro study.
BMC Oral Health
December 2024
Department of Fixed Prosthodontics, Faculty of Dentistry, Mansoura University, Mansoura, Dakahlia Governorate, Egypt.
Background: The objective of this study was to investigate the effect of bonded substrate, zirconia surface conditioning and the interaction between them on the shear bond strength of monolithic zirconia.
Methods: Forty-eight monolithic zirconia discs were CAD-CAM fabricated and divided into two groups according to surface treatment either as milled and universal primer application (Monobond N, Ivoclar-Vivadent) (P) or sandblasting then universal primer application (Monobond N) (SP). Each main group was further divided into three test groups according to the bonded substrate: dentin (DSP, DP), composite (CSP, CP) or resin modified glass ionomer (RMGI) (GSP, GP).
Evaluation of Implant Stability Quotient of Sandblasted Acid-Etched (SAE) and Chemical-Modified SAE Dental Implants: A Clinical Study.
J Pharm Bioallied Sci
July 2024
Department of Oral Medicine and Radiology, Kalinga Institute of Dental Sciences, KIIT Deemed to be University, Patia, Bhubaneswar, Odisha, India.
Objectives: The goal of the current research was to assess the implant stability quotient (ISQ) of dental implants that were chemically changed with SAE and without SAE.
Materials And Methods: Patients in the current study had dental implants fitted with SAE (Group I) and chemically altered SAE (Group II). After implant implantation, resonance frequency analysis (RFA) was performed as soon as possible as well as one, three, six, nine, and twelve weeks later.
Effect of Silane-Containing Adhesives on Repair Bond Strength between Fresh and Aged Composite Materials-A Pilot Study.
Materials (Basel)
September 2024
Department of Endodontics and Restorative Dentistry, University of Zagreb School of Dental Medicine, 10000 Zagreb, Croatia.
This study investigated the effects of different surface treatments and a silane-containing adhesive on the repair bond strength between fresh and aged resin composites. A total of 140 composite specimens were prepared and aged for 24 h or 4 months. Each group was subdivided into seven subgroups ( = 10) depending on the surface treatment (no surface treatment (NT), sandblasting (SAND), or Sof-lex coarse disc (DISC)) in combination with the use of the silane-containing adhesive ScotchBond Universal Plus (SBU) or an adhesive without silane Prime&Bond Universal (P&B).
View Article and Find Full Text PDFEffectiveness of different surface treatments on bond strength between 3D-printed teeth and denture base.
J Prosthodont
September 2024
Department of Oral Rehabilitation, Faculty of Dentistry, University of Pernambuco (FOP/UPE), Recife, Brazil.
Purpose: To investigate the effects of different surface treatments and thermal cycling on the shear bond strength between 3D-printed teeth and denture bases.
Material And Methods: For the shear bond strength (SBS) test, the specimens were the maxillary central incisors (11 × 9 × 7 mm) bonded on a cylindrical base (20 × 25 mm). The control group was heat-cured polymethylmethacrylate (PMMA) (N = 20).
Biological and Physical Characterization of Surface-Modified Grade V Titanium Alloy.
Int J Dent
August 2024
Department of Metallurgical and Materials Engineering National Institute of Technology Karnataka, Surathkal, Mangalore 575 025, India.
Article Synopsis
- Surface modification methods like acid etching, sandblasting, and polydopamine coating were used on titanium disks to explore their effects on bioactivity and cell adhesion.
- Research focused on the physical characteristics (such as surface roughness and wettability) and biological effects using human gingival fibroblast cells.
- Results indicated that polydopamine-coated disks showed the best properties for promoting cell adhesion, suggesting they are a suitable option for implants in living organisms.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!