The positively charged azolium moieties make imidazolium linker an ideal linker for the construction of cationic metal-organic frameworks because the ligand induces cationic environments in the frameworks. Therefore, we employed two imidazolium ligands, 1,3-bis(4-carboxyphenyl)imidazolium chloride (HLCl¯) and 1,3-bis(3,5-dicarboxyphenyl)imidazolium chloride (HLCl¯), to synthesize two nickel azolium-based MOFs, 1 and 2. The as-synthesis MOFs were characterized by PXRD, TGA, FE-SEM, HR-TEM, FTIR and BET measurements. By applying 1 and 2 in liquid phase adsorption of charged molecules of dyes, they successfully exhibit remarkable efficiency for adsorptive removal of anionic dyes, Methyl orange (MO), Congo red (CR), and Orange II sodium salt (OS), from aqueous solution. The framework proves efficient in photocatalytic degradation of anionic dye. Furthermore, in the gaseous phase adsorption, 1 and 2 selectively adsorb CO over CH due to the higher quadrupole moment of CO. Overall, the results show that azolium-based MOFs have potential applications for adsorptive removal of charged organic contaminants from both aqueous and gaseous environment.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jcis.2018.02.003 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Lead Adsorption and Desorption at the Barite (001) Surface in the Presence of EDTA.
ACS ES T Water
January 2025
School of Earth and Environmental Sciences, Queens College, City University of New York, Queens, New York 11367, United States.
Scaling minerals, such as barite, can cause detrimental consequences for oil/gas pipelines and water systems, but their formation can be inhibited by organic chelators such as ethylenediaminetetraacetic acid (EDTA). Here, we resolve how EDTA affects sorption and desorption of Pb at the barite (001) surface using a combination of X-ray scattering and microscopy measurements. In the presence of EDTA, Pb incorporated in the topmost part of the barite surface and adsorbed as inner-sphere complexes on the surface.
View Article and Find Full Text PDFAdjustment of Molecular Sorption Equilibrium on Catalyst Surface for Boosting Catalysis.
Acc Chem Res
January 2025
Key Lab of Biomass Chemical Engineering of Ministry of Education, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China.
ConspectusFor chemical reactions with complex pathways, it is extremely difficult to adjust the catalytic performance. The previous strategies on this issue mainly focused on modifying the fine structures of the catalysts, including optimization of the geometric/electronic structure of the metal nanoparticles (NPs), regulation of the chemical composition/morphology of the supports, and/or adjustment of the metal-support interactions to modulate the reaction kinetics on the catalyst surface. Although significant advances have been achieved, the catalytic performance is still unsatisfactory.
View Article and Find Full Text PDFA comprehensive review of heavy metals (Pb, Cd, Ni) removal from wastewater using low-cost adsorbents and possible revalorisation of spent adsorbents in blood fingerprint application.
Environ Technol
January 2025
Department of Chemical Sciences, University of Johannesburg, Johannesburg, South Africa.
An increasing amount of water pollution is being caused by an increase in industrial activity. Recently, a wide range of methods, including extraction, chemical coagulation, membrane separation, chemical precipitation, adsorption, and ion exchange, have been used to remove heavy metals from aqueous solutions. The adsorption technique is believed to be the most highly effective method for eliminating heavy metals from wastewater among all of them.
View Article and Find Full Text PDFIntegration of ordered porous materials for targeted three-component gas separation.
Nat Commun
January 2025
Key Laboratory of Special Functional and Smart Polymer Materials of Ministry of Industry and Information Technology, Xi'an Key Laboratory of Functional Organic Porous Materials, School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi, China.
Separation of multi-component mixtures in an energy-efficient manner has important practical impact in chemical industry but is highly challenging. Especially, targeted simultaneous removal of multiple impurities to purify the desired product in one-step separation process is an extremely difficult task. We introduced a pore integration strategy of modularizing ordered pore structures with specific functions for on-demand assembly to deal with complex multi-component separation systems, which are unattainable by each individual pore.
View Article and Find Full Text PDFRecovery of wastewater from the pulp and paper industry by cellulose acetate reverse osmosis membrane.
Int J Biol Macromol
January 2025
Key Laboratory of Pulp and Paper Science and Technology of Shandong Province, Ministry of Education, State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, Shandong, China.
The high salt content and color are regarded as a major challenge to the reuse of industrial wastewater. In the present study, the application of cellulose acetate reverse osmosis (RO) membrane in combination with microfiltration (MF), ultrafiltration (UF), or nanofiltration (NF) process was investigated in the purification of biological and Fenton treated pulp and paper wastewater. In the first step, the effect of pH and inlet pressures on the membrane fouling was investigated.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!