A test program was conducted at laboratory and pilot scale to assess the ability of clays used in drilling mud (calcite, bentonite and barite) to create oil-mineral aggregates and disperse crude oil under arctic conditions. Laboratory tests were performed in order to determine the most efficient conditions (type of clay, MOR (Mineral/Oil Ratio), mixing energy) for OMA (Oil Mineral Aggregate) formation. The dispersion rates of four crude oils were assessed at two salinities. Dispersion was characterized in terms of oil concentration in the water column and median OMA size. Calcite appeared to be the best candidate at a MOR of 2:5. High mixing energy was required to initiate OMA formation and low energy was then necessary to prevent the OMAs from resurfacing. Oil dispersion using Corexit 9500 was compared with oil dispersion using mineral fines.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.marpolbul.2017.12.034 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Experimental Investigation of a C-S-H Nanocrystalline Nucleus Modified with PCE Dispersant on the Early-Age Mechanical Behavior of Oil Well Cement Paste.
Materials (Basel)
January 2025
School of Chemical Engineering and Technology, Tianjin University, No. 135 Yaguan Road, Jinnan, Tianjin 300354, China.
For the exploration and development of oil and gas reservoirs in shallow, cold regions and deep oceans, oil well cement (OWC) pastes face the challenge of slow cement hydration reactions and the low early-strength development of cement stone at low temperatures, which can cause the risk of fluid channeling and the defective isolation of the sealing section during the cementing construction process. To address the above challenges, a nanoscale hydrated calcium silicate (C-S-H) crystal nucleus, DRA-1L, was synthesized. Its application performance and action mechanism were studied.
View Article and Find Full Text PDFRheological Behavior of Oil Well Cement Slurries with Addition of Core/Shell TiO@SiO Nanoparticles-Effect of Superplasticizer and Temperature.
Materials (Basel)
January 2025
Eduardo Torroja Institute for Construction Sciences (IETcc-CSIC), C/Serrano Galvache, 4, 28033 Madrid, Spain.
This study investigates the rheological behavior of oil well cement pastes (OWCPs) modified with core/shell TiO@SiO (nTS) nanoparticles and polycarboxylate-ether (PCE) superplasticizers at different temperatures (25, 45, and 60 °C). Results show that nTS particles increased static and dynamic yield stresses and the apparent viscosity of the cement slurries due to an increased solid volume fraction and reduced free water availability. The increase in the slurry dispersion by adding PCE superplasticizers enhanced the effect of the nanoparticles on the rheological parameters.
View Article and Find Full Text PDFComparison of Microfluidic Synthesis of Silver Nanoparticles in Flow and Drop Reactors at Low Dean Numbers.
Micromachines (Basel)
January 2025
School of Chemical Engineering, University of Birmingham, Birmingham B15 2TT, UK.
This study evaluates the performance of continuous flow and drop-based microfluidic devices for the synthesis of silver nanoparticles (AgNPs) under identical hydrodynamic and chemical conditions. Flows at low values of Dean number (De < 1) were investigated, where the contribution of the vortices forming inside the drop to the additional mixing inside the reactor should be most noticeable. In the drop-based microfluidic device, discrete aqueous drops serving as reactors were generated by flow focusing using silicone oil as the continuous phase.
View Article and Find Full Text PDFComparative Analysis of Complete Chloroplast Genomes and Phylogenetic Relationships of 21 Sect. ( L.) Plants.
Genes (Basel)
January 2025
College of Forestry, Guizhou University, Guiyang 550025, China.
: Section is the most diverse group in the genus L., and this group of plants has a long history of cultivation in China as popular ornamental flowers and oil plants. Sect.
View Article and Find Full Text PDF[Application of biomanufacturing in polymer flooding].
Sheng Wu Gong Cheng Xue Bao
January 2025
College of Biotechnology and Bioengineering, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China.
In China, the crude oil supply is highly dependent on overseas countries, and thus strengthening crude oil self-sufficiency has become an important issue of the national energy security. Tertiary oil recovery, especially polymer flooding, has been widely applied in large oil fields in China, which can increase the recovery rate by 15%-20% compared with water flooding. However, the widely used oil flooding polymers show poor thermal stability and salinity tolerance, complicated synthesis ways of monomers, and environmental unfriendliness.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!