In the present work, we report on the use of organized TiO nanotube (NT) layers with a regular intertube spacing for the growth of highly defined α-FeO nano-needles in the interspace. These α-FeO decorated TiO NTs are then explored for Li-ion battery applications and compared to classic close-packed (CP) NTs that are decorated with various amounts of nanoscale α-FeO. We show that NTs with tube-to-tube spacing allow uniform decoration of individual NTs with regular arrangements of hematite nano-needles. The tube spacing also facilitates the electrolyte penetration as well as yielding better ion diffusion. While bare CP NTs show a higher capacitance of 71 μAh cm compared to bare spaced NTs with a capacitance of 54 μAh cm, the hierarchical decoration with secondary metal oxide, α-FeO, remarkably enhances the Li-ion battery performance. Namely, spaced NTs with α-FeO decoration have an areal capacitance of 477 μAh cm, i.e. they have nearly ∼8 times higher capacitance. However, the areal capacitance of CP NTs with α-FeO decoration saturates at 208 μAh cm, i.e. is limited to ∼3 times increase.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1088/1361-6528/aab062 | DOI Listing |
ACS Mater Lett
January 2025
Centre for Materials Science and Nanotechnology, Department of Chemistry, University of Oslo, PO Box 1033, Blindern 0315 Norway.
Whenever the cycling of Li-ion batteries is stopped, the electrode materials undergo a relaxation process, but the structural changes that occur during relaxation are not well-understood. We have used operando synchrotron X-ray diffraction with a time resolution of 1.24 s to observe the structural changes that occur when the lithiation of graphite and LiFePO electrodes are interrupted.
View Article and Find Full Text PDFJ Colloid Interface Sci
December 2024
Key Laboratory of New Energy Development and Energy Storage Technology of Handan, College of Materials Science and Engineering, Hebei University of Engineering, Handan 056038, People's Republic of China.
Herein, a novel composite solid-state polymer electrolytes (CSEs) was regulated by introducing CoNi-MOF (Metal-organic framework) @NiPc (Nickel phthalocyanine) nanofiller (CMN) into PEO (polyethylene oxide) matrix. In this novel system, the NiPc uniformly wrapped around the surface of MOF through hydrogen bond bridging, avoiding the agglomeration of the MOF particles. The chemisorption between Ni in NiPc and the O atoms in the bis(triffuoromethanesulfonyl)imide anion (TFSI) restricted the mobility of the anions within the CSEs, which improved the release of Li ions from the NiPcLi.
View Article and Find Full Text PDFNature
January 2025
School of Environment and Energy, State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control, South China University of Technology, Guangzhou, China.
Lithium (Li) metal batteries (LMBs) are promising for high-energy-density rechargeable batteries. However, Li dendrites formed by the reaction between highly active Li and non-aqueous electrolytes lead to safety concerns and rapid capacity decay. Developing a reliable solid-electrolyte interphase is critical for realizing high-rate and long-life LMBs, but remains technically challenging.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
January 2025
City University of Hong Kong, Department of Chemistry, 83 Tat Chee Avenue, Hong Kong, HONG KONG.
Li metal batteries (LMBs), particularly with a limited Li metal anode and a 5V-class cathode, offer significantly higher energy density compared to the state-of-the-art Li-ion batteries. However, the limited Li anode poses severe challenges to cycling stability due to low efficiency and large volume expansion issues associated with Li. Herein, we design a lightweight and functionalized host composed of Sn nanoparticles embedded into necklace-like B,N,F-doped carbon macroporous fibers (Sn@B/N/F-CMFs) toward anode-less 5V-class LMBs.
View Article and Find Full Text PDFAdv Mater
January 2025
Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei, 230026, P. R. China.
Calcium metal batteries with high capacity and low cost are promising alternatives to Li-ion batteries for large-scale energy storage. However, its development is crucially impeded by the irreversible Ca metal anode, which is highly associated with uncontrollable Ca plating/stripping. Here, we report a new riveting strategy to regulate the nucleation and growth of a Ca metal anode in the 3D structure of a carbon nanotube film (CNF) by introducing in situ-formed Na metal mediators.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!