Facile synthesis of a cationic-doped [CaAlO](4e) composite via a rapid citrate sol-gel method.

One of the greatest challenges in the enhancement of the electrical properties of conductive mayenite [CaAlO](4e) (hereinafter C12A7:e) is the design of a more suitable/simple synthesis strategy that can be employed to obtain the required properties such as excellent stable electrical conductivity, a high electron concentration, outstanding mobility, and an exceptionally large surface area. Therefore, to synthesize C12A7:e in the metallic state, we proposed a facile, direct synthesis strategy based on an optimized sol-gel combustion method under a nitrogen gas environment using the low-cost precursors Ca(NO)·4HO and Al(NO)·9HO. Using this developed strategy, we successfully synthesized moderately conductive nanoscale C12A7:e powder, but with unexpected carbon components (reduced graphene oxide (rGO) and/or graphene oxide (GO)). The synthesized C12A7:e composite at room temperature has an electrical conductivity of about 21 S cm, a high electron concentration of approximately 1.5 × 10 cm, and a maximum specific surface area of 265 m g. Probably, the synthesized rGO was coated on nanocage C12A7:e particles. In general, the C12A7:e electride is sensitive to the environment (especially to oxygen and moisture) and protected by an rGO coating on C12A7:e particles, which also enhances the mobility and keeps the conductivity of C12A7:e electride stable over a long period. Doped mayenite electride exhibits a conductivity that is strongly dependent on the substitution level. The conductivity of gallium-doped mayenite electride increases with the doping level and has a maximum value of 270 S cm, which for the first time has been reported for the stable C12A7:e electride. In the case of Si-substituted calcium aluminate, the conductivity has a maximum value of 222 S cm at room temperature.