Feasibility of using low-cost, byproduct materials as sorbents to remove heavy metals from aqueous solutions.

This work investigates the sorption of heavy metals by low-cost, byproducts such as charcoal fines (CF), waste green sand, and rice husk ash, in order to examine the feasibility of their use as alternative filter materials for metal-contaminated waters. The sorption of Cd, Cu, Pb, and Zn was investigated in batch experiments and sorption isotherms were constructed. The three byproducts showed high metal removal efficiencies (>95%, regardless of the metal concentration tested). The highest metal sorption distribution coefficients were obtained for CF, with maximum values within the 10-10 L kg range for all the target metals. The sorption isotherms were satisfactorily fitted using the Freundlich equation and a linear model, the latter only being valid for initial metal concentrations lower than 0.4 mmol L. Sorption reversibility was very low, with desorption yields lower than 2% and desorption distribution coefficients often higher than 10 L kg. The values of the sorption and desorption parameters indicated that the use of these materials, especially CF, could constitute a low-cost alternative for the remediation of contaminated waters.