Insights into the enhanced photoelectrochemical performance of hydrothermally controlled hematite nanostructures for proficient solar water oxidation.

In this paper, we focus on the controlled growth mechanism of α-FeO nanostructures via the hydrothermal method. The field emission scanning electron microscopy (FESEM) results reveal that at a lower hydrothermal time, the initial nucleation involves the formation of short and thin β-FeOOH nanorods. The subsequent increase in the hydrothermal time leads β-FeOOH to form thicker and longer nanorods. However, high-temperature quenching (HTQ) at 800 °C for 10 min causes the conversion of akaganeite to the hematite phase and activation of hematite by Sn diffusion from a FTO substrate. Sn diffusion from the FTO substrate to the hematite nanostructure was elaborated by X-ray photoelectron spectroscopy (XPS). An α-FeO nanorod photoanode prepared by a hydrothermal reaction for 3 h and HTQ exhibits the highest photocurrent density of 1.04 mA cm. The excellent photoelectrochemical performance could be ascribed to the synergistic effect of the optimum growth of α-FeO nanorod arrays and Sn diffusion. Intensity modulated photovoltage spectroscopy (IMVS) studies revealed that the α-FeO photoanodes prepared at 3 h and HTQ exhibited a long electron lifetime (132.69 ms), and contribute to the enhanced PEC performance. The results confirmed that the controlled growth of the β-FeOOH nanorods, as well as Sn diffusion, played a key role in charge transfer during the photoelectrochemical application. The charge transfer mechanisms in α-FeO nanostructure photoanodes prepared at different hydrothermal times and high-temperature quenching are also investigated.