The use of time-of-flight secondary ion mass spectrometry (SIMS) is of increasing interest for biological and medical applications due to its ability to provide chemical information on a submicrometer scale. However, the detection of larger biomolecules such as phospholipids and peptides is often inhibited by high fragmentation rates and low ionization efficiencies. One way to increase the secondary ion molecular yield is to chemically modify the surface using the matrix-enhanced SIMS approach, where an organic matrix is placed upon the surface. In this study, a Knudsen cell type matrix coater was developed in order to produce well-defined thicknesses of a matrix on a sample in order to study the effect of these matrix layers on the secondary ions. Using this technique, an order of magnitude enhancement of the useful ion yield for lipids was observed and clear enhancement of image contrast for lipids in brain tissue was demonstrated. The study shows that the layer thickness has a great influence on the emission of secondary ions, and therefore, its precise control is important for optimal yield enhancement.

Download full-text PDF

Source
http://dx.doi.org/10.1116/1.5019247DOI Listing

Publication Analysis

Top Keywords

matrix coater
8
mass spectrometry
8
secondary ion
8
secondary ions
8
matrix
5
development knudsen-type
4
knudsen-type matrix
4
coater sample
4
sample preparation
4
preparation mass
4

Similar Publications

High resolution mass spectrometry images are of increasing importance in biological applications, such as the study of tissues and single cells. Two promising techniques for this are matrix-enhanced secondary ion mass spectrometry (ME-SIMS) and matrix-assisted laser desorption/ionization (MALDI). For both techniques, the sample of interest must be coated with a matrix prior to analysis, and analytes must migrate into the matrix.

View Article and Find Full Text PDF

Enhancing the Antifouling Properties of Alumina Nanoporous Membranes by GO/MOF Impregnated Polymer Coatings: In Vitro Studies.

J Funct Biomater

February 2024

Refractories, Ceramics and Building Materials Department, Advanced Materials, Technology and Mineral Resources Research Institute, National Research Centre, 33 El Bohouth St., Dokki, Cairo P.O. Box 12622, Egypt.

Nanoporous membranes (NPMBs) have been the focus of interest of many scientists in the last decade. However, the fouling phenomenon that takes place during the implantation period blocks pores and causes failure in the local implant. In this study, alumina NPMBs were developed using electrochemical anodization through two steps.

View Article and Find Full Text PDF

High refractive index (RI) polyimide/titania nanoparticle hybrid materials were synthesized and characterized in this study. The polyimide synthesis took place via the conventional polycondensation process following the preparation of poly(amic acid), and the nanoparticles were incorporated using an sol-gel process. Thin films of the polyimide/titania nanoparticle hybrids were prepared by optimizing the coating conditions using a spin coater.

View Article and Find Full Text PDF

As much as half or more of deep partial-thickness burn wounds develop hypertrophic scarring and contracture. Once formed, treatments are only minimally effective. Pirfenidone (Pf), indicated for treatment of idiopathic pulmonary fibrosis, is an anti-inflammatory and anti-fibrotic small molecule that potentially can be repurposed as a preventative against scarring in burn wounds.

View Article and Find Full Text PDF

Background: The goal of this work was to synthesize and fabricate matrix type transdermal patches based on a combination of polymers (Eudragit L100, HPMC and PVP K30), plasticizer and crosslinking agents (propylene glycol and triethyl citrate) and adhesives (Dura Tak 87-6908) to increase Thiocolchicoside (THC) absorption topical route. This method allows avoidance of first-pass metabolism along with a consistent and extended duration of therapeutic activity.

Methods: Fabrication and casting of polymeric solutions containing THC was done either in petri plates or through lab coater to get transdermal patches.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!