Raw water from the Banglen (BL) water treatment plant (WTP) and Bangkhen (BK) WTP in central Thailand and Hatyai (HY) WTP in southern Thailand was investigated for dissolved organic nitrogen (DON) reduction. The DON(mg N/L) and the dissolved organic carbon (DOC)/DON ratio were 0.34 and 21, 0.24 and 18, and 1.12 and 3 for the raw waters from BL, BK, and HY WTPs, respectively. Polyaluminum chloride (PACl) dosages of 150, 80, and 40 mg/L at pH 7 were the optimal coagulation conditions for the raw waters from BL, BK, and HY WTPs, respectively, and could reduce DON by 50%, 42%, and 42%, respectively. PACl and powder activated carbon (PAC, both in mg/L) at 150 and 20, 80 and 20, and 40 and 60 could reduce DON in the raw waters from BL, BK, and HY WTPs by 71%, 67%, and 29%, respectively. DOC/DON values of water treated with PACl were similar to those of raw water. DOC/DON values of water treated with PACl and PAC were lower than those of raw water. N-nitrosodimethylamine (NDMA) formation potentials of raw water, water treated with PACl, or both PACl and PAC, and organic fractions of BL, BK, and HY WTPs were below the detection limits of 542 and 237 ng/L, respectively. Reductions in fluorescence intensities of tryptophan-like substances at peaks 240/350 and 280/350 (nm/nm) were moderately (correlation coefficient, R = 0.85 and 0.86) and fairly (R = 0.59, 0.67, and 0.75) correlated with DON reduction.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1080/10934529.2018.1428270 | DOI Listing |
Int J Biol Macromol
December 2024
Yunnan Key Laboratory of Wood Adhesives and Glue Products, Southwest Forestry University, Kunming 650224, PR China; College of Materials and Chemical Engineering, Southwest Forestry University, Kunming 650224, PR China. Electronic address:
The manufacturing of soy-based adhesives with high bonding strength, excellent water resistance, and exceptional environmental performance still faces difficulties. In this work, using glyoxal-urea (GU) resin, chitosan (CS), and soy protein isolate (SPI) as the primary raw materials in order to effectively mitigate the release of free formaldehyde commonly found in traditional wood-based panels. Obtaining an adhesive with high strength, excellent water resistance, and a stable cross-linking structure of GU/CS/SPI (CS represents different mass fractions of chitosan solution).
View Article and Find Full Text PDFInt J Biol Macromol
December 2024
Cooperative Innovation Center of Industrial Fermentation, Ministry of education & Hubei province, National "111" Center for Cellular Regulation and Molecular Pharmaceutics, Hubei University of Technology, Wuhan, China. Electronic address:
Tannic acid (TA) has attracted the attention of researchers as a promising organic ligand capable of forming metal-organic coordination networks with various metal ions at interfaces to impact surface properties. In this study, we innovatively reported a self-assembly method for surface decoration by depositing TA/Fe coatings on the surface of desalted duck egg white nanoparticles (DEWN), further studying the oil/water interfacial properties of the modified particles. The results showed that the ratio and concentration of TA to Fe could modulate interfacial properties.
View Article and Find Full Text PDFWater Res
December 2024
Department of Sanitation and Environmental Engineering, School of Engineering, Federal University of Minas Gerais, Avenue Antônio Carlos, 6627, Campus Pampulha, Belo Horizonte, MG, Brazil. Electronic address:
Arsenic (As) enrichment in groundwater stems from natural and hydrogeochemical factors, leading to geological contamination. Groundwater and surface water are interconnected, allowing As migration and surface water contamination. The As contamination poses health risks through contaminated water consumption.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
December 2024
Stazione Sperimentale Per L'industria Delle Pelli E Delle Materie Concianti S.R.L., 80143, Napoli, Italy.
Leather manufacturing is the process of converting raw animal hides or skins into finished leather. The complex industrial procedures result in a tanning effluent composed of chemical compounds with potentially hazardous impacts on humans and ecosystems. Among the traditional and efficient wastewater treatments, adsorption is an effective and well-known approach, able to manage a wide range of contaminants from wastewater.
View Article and Find Full Text PDFSci Rep
December 2024
Mining College, Guizhou University, Guiyang, 550025, China.
Coal gangue (CG) is an industrial solid waste produced by coal mining and separation that is considered to have a significant effect on the soil or water environment when exposed to the air, exacerbating ecological pollution. The comprehensive utilization of CG has always been a difficult problem due to the complex mineralogical characteristics. Producing concrete aggregates with CG is an effective strategy for utilising CG resources synthetically.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!