Microbially induced calcium carbonate precipitation (MICP) results in the formation of biocement (BC). This process, also known as biocementation, is recently widely used to improve the strength and durability of building materials including soils. In the present study, effectiveness of biocement as admixture with fly ash (FA) was investigated as first few studies to improve geotechnical properties of expansive soils. Biocement precipitated by Bacillus megaterium was blend with four formulations of fly ash at concentrations of 0, 10, 25 and 50%, namely 0% FABC, 10% FABC, 25% FABC, and 50% FABC, respectively. These formulations were separately added to expansive soils. Specimens with 25% FABC resulted in significant improvement in unconfined compressive strength of expansive soil that was more than two-times higher than control. Further, scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) analyses characterized microstructures of soil specimens, and depicted the process of MICP in improving strength of expansive soils. This research indicates that incorporation of biocement in fly ash is an effective means of increasing the strength of expansive soils.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5803229 | PMC |
| http://dx.doi.org/10.1038/s41598-018-20921-0 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
ZSM-5 Zeolite Synthesis from Coal Fly Ash Synthesised Silica: Sole Silica & Alumina Source.
ChemistryOpen
January 2025
Department of Chemistry, University of Botswana, Botswana Private bag UB, Gaborone, 00704, Botswana.
This study explores the synthesis of ZSM-5 zeolite using high-purity mesoporous silica exclusively derived from coal fly ash (CFA), eliminating the need for additional silica or alumina sources. Traditional ZSM-5 synthesis relies on costly and environmentally harmful pure chemicals, whereas this approach utilizes CFA, an industrial byproduct, addressing both cost and sustainability concerns. The synthesized ZSM-5 zeolite demonstrates exceptional purity, with a surface area of 455.
View Article and Find Full Text PDFWaste marble sludge and calcined clay brick powders in conventional cement farina production for cleaner built environment.
Sci Rep
January 2025
Center for Global Health Research, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, India.
In the manufacturing of some sectors, such as marble and brick, certain byproducts, such as sludge, powder, and pieces containing valuable chemical compounds, emerge. Some concrete plants utilize these byproducts as mineralogical additives in Turkey. The objective of the experimental study is to ascertain whether the incorporation of waste from the marble and brick industries, in powder form, into cement manufacturing as a mineralogical additive or substitute is a viable option.
View Article and Find Full Text PDFSolidified lake sediment with industrial waste and construction waste used as barrier cover material: mechanical strength, water resistance performance, and microscopic analysis.
Environ Technol
January 2025
School of Civil Engineering and Architecture, Wuhan Polytechnic University, Wuhan, People's Republic of China.
This study introduces a novel landfill cover material, employing lake sediment as a substrate, stabilised with fly ash, slag, desulfurisation gypsum and construction waste. The mechanical properties, including shear strength parameters, unconfined compressive strength, hydraulic conductivity, volumetric shrinkage, and water content, of the solidified sludge were evaluated. The microscopic mechanism of the solidified sludge were investigated through XRD, FTIR, and SEM-EDS techniques.
View Article and Find Full Text PDFDeamination mechanism of modified magnesium slag using wet aging and its performance evolution as backfill material.
J Environ Manage
January 2025
School of Business, Xi'an University of Finance and Economics, Xi'an, 710100, China.
The purpose of this study is to solve the problem of ammonia (NH) release when modified magnesium slag (MMS) is used as coal mine backfill cementitious material, and to explore its chemical mechanism and put forward effective solutions. Uniaxial compressive strengths (UCS) hydration kinetics, scanning electron microscope (SEM), and thermogravimetric analysis-derivative thermogravimetry (TG-DTG), X-ray diffractometer (XRD) and other testing methods were used to study the evolution of the properties of MMS-based backfill material, which provided a scientific basis for the safe utilization of MMS. First, the chemical mechanism underlying the release of NH from MMS was identified, and it was confirmed that MgN and LiN are the main nitrogen sources.
View Article and Find Full Text PDFLead/cadmium impacts on zeolite-tobermorite: Nutrient release and sediment stability.
Environ Pollut
January 2025
Department of Mineral Processing Engineering, Taiyuan University of Technology, Taiyuan, 030024, China.
To realize the comprehensive utilization of large amounts of high-ash coal slime and comprehensively understand the excellent performance of nutrient release and lead and cadmium adsorption of high-ash coal slime silicon composite materials, green and safe mild hydrothermal conditions (200 °C) were used to prepare the rich-rich coal slime. Zeolite/tobermorite composites (Z-TOBs) were used in this study. Batch adsorption tests and repeated extraction tests were used to determine whether silicon, potassium, and calcium nutrients of Z-TOBs have sustained release properties and are affected by pH.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!