The functional properties of nanoparticle thin films depend strongly on the arrangement of the nanoparticles within the material. In particular, anisotropic optoelectronic properties can be achieved through the aligned assembly of 1D nanomaterials such as silver nanowires (AgNWs). However, the control of the hierarchical organization of these nanoscale building blocks across multiple length scales and over large areas is still a challenge. Here, we show that the oriented deposition of AgNWs using grazing incidence spraying of the nano-object suspensions on a substrate comprising parallel surface wrinkles readily produces highly oriented monolayer thin films on macroscopic areas (>5 × 5 mm). The use of textured substrates enhances the degree of ordering as compared to flat ones and increases the area over which AgNWs are oriented. The resulting microscopic linear arrangement of AgNWs evaluated by scanning electron microscopy (SEM) reflects in a pronounced macroscopic optical anisotropy measured by conventional polarized UV-vis-NIR spectroscopy. The enhanced ordering obtained when spraying is done in the same direction as the wrinkles makes this approach more robust against small rotational offsets during preparation. On the contrary, the templating effect of the wrinkle topography can even dominate the shear-driven alignment when spraying is performed perpendicular to the wrinkles: the concomitant but opposing influence of topographic confinement (alignment along the wrinkles) and of spray-induced shear forces (orientation along the spraying direction) lead to films in which the predominant orientation of AgNWs gradually changes from one direction to its perpendicular one over the same substrate in a single processing step. This demonstrates that exploiting the subtle balance between shear forces and substrate-nanowire interactions mediated by wrinkles offers a new way to control the self-assembly of nanoparticles into more complex patterns.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.7b15042 | DOI Listing |
ACS Sens
January 2025
Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, School of Materials Science and Engineering, Hubei University, Wuhan 430062, China.
Epithelial cell adhesion molecule (EpCAM) was considered to be an important marker of multiple tumors, and its high expression is closely related to the early diagnosis and treatment of tumors. At present, metal oxide semiconductors have become a key component of biosensor and bioelectronics technology. Tin oxide shows great potential for development because of its nontoxic, nonpolluting, low price, and excellent electrical properties.
View Article and Find Full Text PDFSmall
January 2025
School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), UNIST-gil 50, Ulsan, 44919, Republic of Korea.
Transparent solar cells maximize installation space by being applicable to glass areas such as building windows and sunroofs, necessitating high power conversion efficiency (PCE), long-term stability, and aesthetic appeal. This study demonstrates the development of transparent crystalline silicon (c-Si) solar cells that exhibit vivid colors, enhanced PCE, and long-term stability. To achieve vivid coloration, a metal-oxide-based color filter with a single metal layer and TiO thin films, which show high transmittance, is integrated into the neutral-colored transparent c-Si solar cells.
View Article and Find Full Text PDFSmall
January 2025
Centre for Organic Photonics & Electronics, School of Chemistry and Molecular Biosciences, The University of Queensland, Brisbane, QLD, 4072, Australia.
Y6 homojunction solar cells are prepared using the exciton/electron-blocking material poly[9,9-di-n-octylfluorene-alt-N-(4-sec-butylphenyl)diphenylamine] (TFB) as a secondary hole transport layer material in conjunction with PEDOT:PSS. Using this device architecture, a maximum power conversion efficiency (PCE) of 2.57% is achieved, which is the highest reported thus far for a solution-processed small molecule homojunction organic photovoltaic (OPV) device.
View Article and Find Full Text PDFAdv Mater
January 2025
School of Chemistry and Physics, ARC Research Hub in Zero-emission Power Generation for Carbon Neutrality, and Centre for Materials Science, Queensland University of Technology, Brisbane, Queensland, 4000, Australia.
SnTe-based thermoelectric materials have attracted significant attention for their exceptional performance in mid-to-high temperature ranges, positioning them as promising candidates for thermoelectric power generation. However, their efficiency is constrained by challenges related to electronic structure, defect chemistry, and phonon behavior. This review comprehensively summarizes advancements in SnTe thermoelectric materials and devices over the past five years, focusing on strategies to address these limitations.
View Article and Find Full Text PDFJACS Au
January 2025
Department of Chemical and Biomolecular Engineering, University of Houston, Houston, Texas 77204, United States.
The influence of high-intensity electric fields on the stability of polymeric materials is a problem of interest in the design of next-generation energy storage and electronic devices, and for understanding the limits of stability of polymer films exposed to large electric fields generally. Here, we show that the dielectric strength of entangled glassy polymer films increases as an inverse power-law of the film thickness for "ultrathin" films below a micron in thickness. The dielectric strength enhancement in these polymer films becomes as large as ≈2 GV/m in films thinner than 100 nm, but in this thickness regime, the increase of the dielectric strength depends strongly on the polymer mass, sample aging time, and the method of film preparation.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!