We present a three-layer silicon nitride on silicon platform for constructing very large photonic integrated circuits. Efficient interlayer transitions are enabled by the close spacing between adjacent layers, while ultra-low-loss crossings are enabled by the large spacing between the topmost and bottommost layers. We demonstrate interlayer taper transitions with losses < 0.15 dB for wavelengths spanning from 1480 nm to 1620 nm. Our overpass waveguide crossings exhibit insertion loss < 2.1 mdB and crosstalk below -56 dB in the wavelength range between 1480 nm and 1620 nm with losses as low as 0.28 mdB. Our platform architecture is suited to meet the demands of large-scale photonic circuits which contain hundreds of crossings.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OE.25.030862 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Visible-light photonic integrated circuits (PICs) promise scalability for technologies such as quantum information, biosensing, and scanning displays, yet extending large-scale silicon photonics to shorter wavelengths has been challenging due to the higher losses. Silicon nitride (SiN) has stood out as the leading platform for visible photonics, but the propagation losses strongly depend on the film's deposition and fabrication processes. Current loss measurement techniques cannot accurately distinguish between absorption and surface scattering, making it difficult to identify the dominant loss source and reach the platform's fundamental limit.
View Article and Find Full Text PDFLow-loss and energy-efficient phase shifters are an effective tool to reduce the power consumption of large-scale photonic integrated circuits. In this work, a low-loss and power-efficient thermo-optic phase shifter has been demonstrated on the silicon-on-insulator platform. The multimode spiral waveguide is optimized to obtain lower power consumption and low cross talk.
View Article and Find Full Text PDFUltra-compact waveguide crossing (UC-WC) is a basic component in optoelectronic fusion chip solutions, as its footprint is smaller in the orders of magnitude than that of traditional photonic integrated circuits (PICs). However, a large loss of UC-WC (decibel level) becomes a barrier to scaling and practicality. Here, we propose a series of ultra-low loss UC-WC silicon devices using an advanced hybrid design that combines the adjoint method with the direct binary search (DBS) algorithm.
View Article and Find Full Text PDFUltra-low-loss tunable piezoelectric-actuated metasurfaces achieving 360° or 180° dynamic phase shift at millimeter-waves.
Sci Rep
September 2020
Department of Electrical, Electronic and Systems Engineering, University of Birmingham, Birmingham, B15 2SA, UK.
Phase shifting metasurfaces typically consist of an ordered metallic geometry that is patterned onto a dielectric substrate and incorporate active devices or materials that enable dynamic tuning. Existing methods at mm-wave and submillimeter bands typically suffer from high losses, which are predominantly produced by the inherent limitations of the tuning elements or materials. This report presents a new, ultra-low-loss and phase-tunable, reflection type metasurface design, which outperforms previously reported technologies in terms of phase shifting and loss.
View Article and Find Full Text PDFWe present a three-layer silicon nitride on silicon platform for constructing very large photonic integrated circuits. Efficient interlayer transitions are enabled by the close spacing between adjacent layers, while ultra-low-loss crossings are enabled by the large spacing between the topmost and bottommost layers. We demonstrate interlayer taper transitions with losses < 0.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!