Carrier recombination and light management of the dopant-free silicon/organic heterojunction solar cells (HSCs) based on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are the critical factors in developing high-efficiency photovoltaic devices. However, the traditional passivation technologies can hardly provide efficient surface passivation on the front surface of Si. In this study, a photoinduced electric field was induced in a bilayer antireflective coating (ARC) of polydimethylsiloxane (PDMS) and titanium oxide (TiO) films, due to formation of an accumulation layer of negative carriers (O species) under UV (sunlight) illumination. This photoinduced field not only suppressed the silicon surface recombination but also enhanced the built-in potential of HSCs with 84 mV increment. In addition, this photoactive ARC also displayed the outstanding light-trapping capability. The front PEDOT:PSS/Si HSC with the saturated O received a champion PCE of 15.51% under AM 1.5 simulated sunlight illumination. It was clearly demonstrated that the photoinduced electric field was a simple, efficient, and low-cost method for the surface passivation and contributed to achieve a high efficiency when applied in the Si/PEDOT:PSS HSCs.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsnano.7b07222DOI Listing

Publication Analysis

Top Keywords

silicon/organic heterojunction
8
heterojunction solar
8
solar cells
8
surface passivation
8
photoinduced electric
8
electric field
8
sunlight illumination
8
photoinduced
4
photoinduced field-effect
4
passivation
4

Similar Publications

Improvement of the Optoelectrical Properties of a Transparent Conductive Polymer via the Introduction of ITO Nanoparticles and Its Application in Crystalline Silicon/Organic Heterojunction Solar Cells.

ACS Appl Mater Interfaces

July 2021

Key Laboratory for Special Functional Materials and Structure Design of Ministry of Education, School of Materials and Energy, Lanzhou University, Lanzhou 730000, China.

Compared with conventional transparent conductive indium tin oxide (ITO) films, poly(3,4-ethylenedioxythiophene):poly (styrenesulfonic acid) (PEDOT:PSS) as a conductive polymer material has been diffusely applied in organic optoelectronic devices. However, its optoelectrical properties need to be further improved. Therefore, a simple and universal approach with introducing ITO nanoparticles (NPs) was proposed to improve the optoelectrical properties of PEDOT:PSS thin films.

View Article and Find Full Text PDF

Embedding nanowires, such as silver nanowires (AgNWs), in a transparent conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) to enhance its conductivity is technologically important for improving the performances of devices comprising transparent conductive layers. Addition of nanowires in the highly conducting form of cosolvent (ethylene glycol) or mixed-cosolvent (ethylene glycol and methanol) modified PEDOT:PSS could change the nanowire structure and significantly alter the conductivity. Here, we report a simple method to embed AgNWs in PEDOT:PSS efficiently to improve its conductivity.

View Article and Find Full Text PDF

Carrier recombination and light management of the dopant-free silicon/organic heterojunction solar cells (HSCs) based on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are the critical factors in developing high-efficiency photovoltaic devices. However, the traditional passivation technologies can hardly provide efficient surface passivation on the front surface of Si. In this study, a photoinduced electric field was induced in a bilayer antireflective coating (ARC) of polydimethylsiloxane (PDMS) and titanium oxide (TiO) films, due to formation of an accumulation layer of negative carriers (O species) under UV (sunlight) illumination.

View Article and Find Full Text PDF

Naphthalene Diimide-Based n-Type Polymers: Efficient Rear Interlayers for High-Performance Silicon-Organic Heterojunction Solar Cells.

ACS Nano

July 2017

Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, Suzhou 215123, China.

Silicon-organic heterojunction solar cells suffer from a noticeable weakness of inefficient rear contact. To improve this rear contact quality, here, two solution-processed organic n-type donor-acceptor naphthalene diimide (NDI)-based conjugated polymers of N2200 and fluorinated analogue F-N2200 are explored to reduce the contact resistance as well as to passivate the Si surface. Both N2200 and F-N2200 exhibit high electron mobility due to their planar structure and strong intermolecular stacking, thus allowing them to act as excellent transporting layers.

View Article and Find Full Text PDF

Silicon/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) heterojunction solar cells with 16.2% efficiency and excellent stability are fabricated on pyramid-textured silicon substrates by applying a water-insoluble ester as capping layer. This shows that a conformal coating of PEDOT:PSS on textured silicon can greatly improve the junction quality with the main stability failure routes related to the moisture-induced poly(3,4-ethylenedioxythiophene) aggregations and the tunneling silicon oxide autothickening.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!