An expanded granular sludge bed reactor was evaluated for the anaerobic digestion of commercial laundry wastewater and domestic sewage focused on the removal of linear alkylbenzene sulfonate (LAS). The reactor was operated in three stages, all under mesophilic conditions and with a hydraulic retention time of 36 h. At stage I, the laundry wastewater was diluted with tap water (influent: 15.3 ± 4.9 mg LAS/L); at stage II, 50% of the feed volume was domestic sewage and 50% was a mixture of tap water and laundry wastewater (influent: 15.8 ± 4.9 mg LAS/L); and at stage III, only domestic sewage was used as a diluent of the laundry wastewater (influent: 24.1 ± 4.1 mg LAS/L). Due to the addition of domestic sewage the organic compounds content and LAS in the influent increased. Under such conditions, it was observed that LAS removal rate decreased from 77.2 ± 14.9% (stage I) to 55.3 ± 18.4% (stage III). Statistical tests indicated that the decrease of the LAS removal rate was significant and indicated a correlation between the removal of LAS and specific organic loading rate. The analysis of 16S rRNA gene sequencing revealed genera similar to Geobacter, Desulfovibrio, Syntrophomonas, Syntrophus, Desulfobulbus, Desulfomonile, and Desulfomicrobium, which were related to the degradation of LAS.

Download full-text PDF

Source
http://dx.doi.org/10.1080/09593330.2017.1414317DOI Listing

Publication Analysis

Top Keywords

laundry wastewater
20
domestic sewage
20
commercial laundry
8
wastewater domestic
8
tap water
8
las/l stage
8
wastewater influent
8
stage iii
8
las removal
8
removal rate
8

Similar Publications

Article Synopsis
  • This study explores the use of micro-inter-electrode distances in electrocoagulation to enhance treatment and energy efficiency for low-conductivity laundry wastewater.
  • The research analyzed how different interelectrode distances, current densities, and anode materials impacted the removal rates of pollutants like paracetamol and total organic carbon.
  • Findings show that while micro-distances reduced energy consumption significantly, they also resulted in increased sludge production, highlighting a trade-off in using different electrode materials for optimal performance.
View Article and Find Full Text PDF

Surfactants can compete with microplastics for surfaces using adhesives as substrates for microplastic sequestration.

Environ Pollut

January 2025

Department of Materials Science and Engineering, University of Michigan, 2300 Hayward Street, Ann Arbor, MI, 48109-2117, USA. Electronic address:

Experimental efforts supplemented by modeling gauged whether common additives found in soaps and laundry detergents interfered with polyacrylate adhesive-based capture of microplastics. On the experimental front, poly(2-ethylhexyl acrylate) (PEHA) samples were evaluated using gravimetric analysis, probe tack, and functional assessments of adhesive-coated glass slides immersed into DI water solutions containing both microparticles and additives (solvents, softeners, and non-ionic surfactants). Nylon-6 spheres and polyethylene terephthalate microplastics were chosen for adsorption using a count-based method by ImageJ imaging analysis.

View Article and Find Full Text PDF

Application of central composite design for commercial laundry wastewater treatment by packed bed electrocoagulation using sacrificial iron electrodes.

Chemosphere

November 2024

BOSK-Bioproducts, 100-399 rue jacquard, Quebec, QC, G1N4J6, Canada; Research Centre for Eco-Environmental Engineering, Dongguan University of Technology, China.

This research paper deals with a novel method utilizing packed bed electrocoagulation (PBEC) comprising of sacrificial iron electrodes and coupled with extracellular polymeric substances (EPS) used as flocculent agents for the treatment of commercial laundry wastewater (LWW). The study employs stainless steel cathodes, graphite anodes, and scrap iron pieces as sacrificial electrodes, ensuring efficient treatment in dynamic batch mode operation with enhanced contact time facilitated by serpentine flow. The initial characteristics of LWW were COD 579 ± 30 mg/L, TSS of 60 ± 10 mg/L, TS of 622 ± 20 mg/L, turbidity of 110 ± 5 NTU, pH of 9 ± 0.

View Article and Find Full Text PDF

Synthetic textiles constitute a significant emission source of microplastics into the environment release by mechanical abrasion during laundering. Only a portion of these microfibers is retained in wastewater treatment plants, and major issues to identify and quantify microfibers remain because of their nature, shape, and size. Most widespread natural (cotton, linen) and synthetic (polyester PET, nylon polyamide PA, viscose) textiles were first analyzed using a pyrolysis and oxidation based-method: the Rock-Eval® device.

View Article and Find Full Text PDF

Microplastic retention in green walls for nature-based and decentralized greywater treatment.

Environ Pollut

December 2024

Water, Energy and Environmental Engineering, Faculty of Technology, 90014, University of Oulu, Finland.

In wastewater treatment, two issues have recently received increased attention: nature-based solutions for addressing urban water stress through decentralized treatment and re-use; and emerging pollutants such as microplastics (MPs). At the interface of these, this study investigated living green walls for greywater treatment and their potential for MP removal. A large, pilot-scale green wall was irrigated with greywater (a mix of water collected from laundry, dishwasher, bathroom sinks, and synthetic greywater), and effluent from planted and unplanted sections was compared.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!