Aircraft noise increases the risk of cardiovascular diseases and mental illness. The allowable limit for sound in the vicinity of an airport is 65 decibels (dB) averaged over a 24-h 'day and night' period (DNL) in the United States. We evaluate the trade-off between the cost and the health benefits of changing the regulatory DNL level from 65 dB to 55 dB using a Markov model. The study used LaGuardia Airport (LGA) as a case study. In compliance with 55 dB allowable limit of aircraft noise, sound insulation would be required for residential homes within the 55 dB to 65 dB DNL. A Markov model was built to assess the cost-effectiveness of installing sound insulation. One-way sensitivity analyses and Monte Carlo simulation were conducted to test uncertainty of the model. The incremental cost-effectiveness ratio of installing sound insulation for residents exposed to airplane noise from LGA was $11,163/QALY gained (95% credible interval: cost-saving and life-saving to $93,054/QALY gained). Changing the regulatory standard for noise exposure around airports from 65 dB to 55 dB comes at a very good value.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5750915 | PMC |
| http://dx.doi.org/10.3390/ijerph14121497 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Development of a Fire-Retardant and Sound-Insulating Composite Functional Sealant.
Materials (Basel)
December 2024
School of Materials Science and Engineering, Hainan University, Haikou 570228, China.
The use of traditional sealing materials in buildings poses a significant risk of fire and noise pollution. To address these issues, we propose a novel composite functional sealant designed to enhance fire safety and sound insulation. The sealant incorporates a unique four-component filler system consisting of carbon nanotubes (CNTs) decorated with layered double hydroxides (LDHs), ammonium dihydrogen phosphate (ADP), and artificial marble waste powder (AMWP), namely CLAA.
View Article and Find Full Text PDFComparison of the Influence of Polypropylene (PP) or Polybutylene Terephthalate (PBT)-Based Meltblown and Polyester/Polyamide-Based Hydroentangled Inner Layers on the Sound and Thermal Insulation Properties of Layered Nonwoven Composite Structures.
Polymers (Basel)
January 2025
Department of Textile Engineering, Faculty of Engineering, Erciyes University, 38039 Kayseri, Türkiye.
Thermal and sound insulation play a vital role in today's world, and nonwoven composite structures including microfiber layers provide efficient solutions for addressing these demands. In this study, the sound and thermal insulation properties of nonwoven composite structures, including single-layer meltblown, multilayer meltblown, hydroentangled, and nanofiber nonwoven inner layers, were compared statistically by using Design Expert 13 software. The inner layer type and outer layer type of the composite structures were considered as independent variables, and thickness, bulk density, air permeability, sound absorption coefficient, and thermal resistance of composite structures were evaluated as dependent variables during statistical analyses.
View Article and Find Full Text PDFPreparation and Characterization of Melamine Aniline Formaldehyde-Organo Clay Nanocomposite Foams (MAFOCF) as a Novel Thermal Insulation Material.
Polymers (Basel)
December 2024
Nano Science and Nano Engineering Department, Ataturk University, Erzurum 25240, Turkey.
The main purpose of this study is to prepare a melamine aniline formaldehyde foam, an MAF copolymer, with lower water sensitivity and non-flammability properties obtained by the condensation reaction of melamine, aniline, and formaldehyde. In addition, the preparation of MAFF composites with organoclay reinforcement was determined as a secondary target in order to obtain better mechanical strength, heat, and sound insulation properties. For the synthesis of foams, the microwave irradiation technique, which offers advantages such as faster reactions, high yields and purities, and reduced curing times, was used together with the heating technique and the effect of organoclay content on the structural and textural properties of foams and both heat insulation and mechanical stability was investigated.
View Article and Find Full Text PDFInvestigation of factors affecting the sound absorption behaviour of 3D printed hexagonal prism lattice polyamide structures.
Sci Rep
December 2024
Faculty of Mechanical Engineering, Department of Machining, Assembly and Engineering Metrology, VSB-Technical University of Ostrava, Ostrava-Poruba, 708 00, Czech Republic.
The aim of this work is to investigate the sound absorption properties of open-porous polyamide 12 (PA12) structures produced using Selective Laser Sintering (SLS) technology. The examined 3D-printed samples, fabricated with hexagonal prism lattice structures, featured varying thicknesses, cell sizes, and orientations. Additionally, some samples were produced with an outer shell to evaluate its impact on sound absorption.
View Article and Find Full Text PDFAirborne sound insulation performance of lightweight double leaf walls with different stud types.
Sci Rep
December 2024
Key Laboratory of Urban and Architectural Heritage Conservation, Ministry of Education, School of Architecture, Southeast University, 2# Sipailou, Nanjing, 210096, China.
Lightweight double leaf walls have been extensively employed in assembly and large-space buildings. Due to the complex and varied stud configurations in double leaf walls, accurately and efficiently predicting the sound transmission loss (STL) of such structures poses a significant challenge. To support performance-based design workflows, this paper presents an analytical model based on sound transmission path decoupling, enabling architects to quickly predict the STL of commonly used lightweight double leaf wall types, including wooden, steel, and acoustical stud constructions.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!