The petroleum refinery wastewater which is a product of petroleum refinery has a high organic content. This study explores the utilization of petroleum refinery wastewater collected from petroleum refinery as a resource for bioelectricity generation and using this energy for salt removal from seawater in a hydraulically connected osmotic microbial fuel cell (OsMFC) and up flow microbial desalination cell (UMDC). Anaerobic mixed sludge was used in the anodic chamber of OsMFC and UMDC. Petroleum refinery wastewater was fed first into the OsMFC and then transferred to the UMDC. The OsMFC and UMDC were connected to 1000 and 100 Ω external resistance respectively. Experimental results showed that the combined system could remove 93% of chemical oxygen demand (COD) from the petroleum refinery wastewater whilst 48% salts were removed from the seawater. Experimental results showed that this complex wastewater can be treated and produce bioelectricity, with COD removal and salt removal. The hydraulically connected OsMFC and up flow MDC provide a suitable platform for wastewater treatment and seawater desalination.

Download full-text PDF

Source
http://dx.doi.org/10.1080/09593330.2017.1410580DOI Listing

Publication Analysis

Top Keywords

petroleum refinery
28
refinery wastewater
20
wastewater treatment
8
treatment seawater
8
seawater desalination
8
osmotic microbial
8
microbial fuel
8
fuel cell
8
microbial desalination
8
desalination cell
8

Similar Publications

Monoelemental calibration solutions are the most common reference in elemental analysis, linking measurement results to the International System of Units (SI). National Metrology Institutes (NMI) prepare these solutions as certified reference materials (CRM) and determine their elemental mass fraction with high accuracy. Characterization with high accuracy is one of the most critical steps in CRM production.

View Article and Find Full Text PDF

Green coal and lubricant via hydrogen-free hydrothermal liquefaction of biomass.

Nat Commun

January 2025

Laboratory of Environment-Enhancing Energy (E2E), College of Water Resources and Civil Engineering, China Agricultural University, Beijing, 100083, China.

Biocrude derived from biomass via hydrothermal liquefaction (HTL) is a sustainable substitute for petroleum to obtain energy and biochemicals. Upgrading biocrude inevitably faces the trade-off between consuming large amounts of hydrogen via hydrotreating and high yield of solid residue without additional hydrogen. In this work, we report a non-hydrogenated refinery paradigm for nearly complete valorization (~90%), via co-generating green coal and bio-lubricant.

View Article and Find Full Text PDF

A Comprehensive Assessment of the Marginal Abatement Costs of CO of Co-Optima Multi-Mode Vehicles.

Energy Fuels

January 2025

Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, Washington 99354, United States.

The Co-Optimization of Fuels and Engines (Co-Optima) is a research and development consortia funded by the U.S. Department of Energy, which has engaged partners from national laboratories, universities, and industry to conduct multidisciplinary research at the intersection of biofuels and combustion sciences.

View Article and Find Full Text PDF

The conversion of diluted CO₂ into high-energy fuels is increasingly central to renewable energy research. This study investigates the efficacy of a Gd₂NiMnO₆ dendritic nanofibrous (DNF) photocatalyst in transforming carbon dioxide to methane through photoreduction. Gd₂NiMnO₆ DNF was found to provide active adsorption sites and control the strand dimensions for metal groups, facilitating the chemical absorption of CO₂.

View Article and Find Full Text PDF

This study presents a novel, eco-friendly method for removing methyldiethanolamine (MDEA) from wastewater, addressing its environmental impact and elevated chemical oxygen demand (COD) from gas refineries. We employed two wetland plants, Phragmites australis and Typha latifolia, utilizing a hydroponics approach to assess MDEA removal efficiency. Wastewater samples from the Ilam gas refinery in Iran were tested at varying initial concentrations (50 to 1600 ppm) over three consecutive 7-day periods, with a 1-day rest interval.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!