To reduce intrinsic defect density in perovskite films, various additives are often added into the precursor solution. In this paper, a novel solution, in which isopropanol (IPA) was added into the precursor solution, was developed for the preparation of normal planar perovskite solar cells (PSCs). A champion power conversion efficiency (PCE) of 19.70 % was achieved with this approach. By adding IPA into the precursor solution, CH NH PbI perovskite showed better crystallization and stability, indicating improved film quality. Because of the improved morphology of perovskite crystal, the PCE of PSCs increased. In addition, the unencapsulated PSCs retained high output for up to 40 days in air at room temperature, indicating the stability of PSCs. These results may provide a new avenue for manufacturing high efficiency and high stability PSCs.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/chem.201704181 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Prebiotic Route to Lactate from Acetaldehyde, Cyanide and Carbon Dioxide.
Chemistry
December 2024
University of Copenhagen, Chemistry, Universitetsparken 5, Kemisk Institut, 2100, Copenhagen, DENMARK.
The atmospheric concentration of carbon dioxide (CO2) has fluctuated throughout Earth's history. However, the role of CO2 in prebiotic chemistry has predominantly been limitedly postulated as a C1 precursor, which can be reduced to carbon monoxide or methane mimicking the Wood-Ljungdahl pathway. Herein we present neglected roles of CO2 as an active promoter in accessing biologically important C3-builidng blocks such as lactate, via redox-economic reaction cycles from cyanide (C1) and acetaldehyde (C2).
View Article and Find Full Text PDFControllable Growth of Monolayer and Bilayer WSe by Liquid-Phase Precursor via Chemical Vapor Deposition for Photodetection.
Nanomaterials (Basel)
December 2024
School of Flexible Electronics (Future Technologies), Institute of Advanced Materials (IAM), Nanjing Tech University (NanjingTech), 30 South Puzhu Road, Nanjing 211816, China.
Two-dimensional WSe nanosheets have received increasing attention due to their excellent optoelectronic properties. Solid precursors, such as WO and Se powders, have been extensively employed to grow WSe nanosheets by the chemical vapor deposition (CVD) method. However, the high melting point of WO results in heterogeneous nucleation sites and nonuniform growth of the WSe nanosheet.
View Article and Find Full Text PDFLaser Synthesis and Photocatalytic Properties of Bismuth Oxyhalides Nanoparticles.
Nanomaterials (Basel)
December 2024
Laboratory of Advanced Materials and Technology, Tomsk State University, Tomsk 634050, Russia.
Photocatalysis offers a powerful approach for water purification from toxic organics, hydrogen production, biosolids processing, and the conversion of CO into useful products. Further advancements in photocatalytic technologies depend on the development of novel, highly efficient catalysts and optimized synthesis methods. This study aimed to develop a laser synthesis technique for bismuth oxyhalide nanoparticles (NPs) as efficient and multifunctional photocatalysts.
View Article and Find Full Text PDFFine-Modulation of Perovskite Ion-Additive Binding Interaction Using Multidentate Ligation for High Performance Perovskite Light-Emitting Diodes.
ACS Nano
December 2024
Department of Chemistry, Korea University, Seoul 02841, Republic of Korea.
Research on perovskite light-emitting diodes (PeLEDs) has primarily focused on modulating crystal growth to achieve smaller grain sizes and defect passivation using organic additives. However, challenges remain in controlling the intermolecular interactions between these organic additives and perovskite precursor ions for precise modulation of crystal growth. In this study, we synthesize two triphenylphosphine oxide (TPPO)-based multidentate additives: bidentate hexane-1,6-diyl-bis(oxy-4-triphenylphosphine oxide) (2-TPPO) and tetradentate pentaerythrityl-tetrakis(oxy-4-triphenylphosphine oxide) (4-TPPO).
View Article and Find Full Text PDFSuccessive Reactions of Trimethylgermanium Chloride to Achieve > 26% Efficiency MA-Free Perovskite Solar Cell With 3000-Hour Unattenuated Operation.
Adv Mater
December 2024
Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology School of Materials Science and Engineering, Shaanxi Normal University, Xi'an, 710119, P. R. China.
The rapidly increased efficiency of perovskite solar cells (PSCs) indicates their broad commercial prospects, but the commercialization of perovskite faces complex optimization processes and stability issues. In this work, a simple optimized strategy is developed by the addition of trimethylgermanium chloride (TGC) into FACsPbI precursor solution. TGC triggers the successive interactions in perovskite solution and film, involving the hydrolysis of vulnerable Ge─Cl bond forming Ge─OH group, then forming the hydrogen bonds (O─H···N and O─H···I) with FAI.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!