Poly (lactic acid) (PLA)/cellulose nanocrystals (CNC), poly(butylene succinate) (PBS)/CNC and PLA/PBS/CNC composite films were prepared using a solution-casting technique. CNCs can be used to enhance the crystallization of PLA by offering more nucleation sites, and PBS can increase spherulite growth rate of PLA by providing flexible chains. However, CNCs and PBS together tend to interfere with each other and thus enhancement in the crystallization of PLA is lost. FTIR, contact-angle measurements, and dissolution experiments were used to characterize the materials. It was found that the interfacial affinity was greater in the CNC-PBS system than the CNC-PLA system. It was therefore concluded that the PBS chains occupy most of the CNC surfaces in the molten state before cooling. Consequently, PLA was mainly blocked from the CNCs and the nucleation effect was greatly weakened. The binary and ternary composite systems are discussed in terms of their crystallization processes.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.carbpol.2017.09.077DOI Listing

Publication Analysis

Top Keywords

polybutylene succinate
8
interfacial affinity
8
crystallization pla
8
combined cellulose
4
cellulose nanocrystals
4
nanocrystals polybutylene
4
succinate polylactic
4
polylactic acid
4
crystallization
4
acid crystallization
4

Similar Publications

Template-Assisted Electrospinning and 3D Printing of Multilayered Hierarchical Vascular Grafts.

J Biomed Mater Res B Appl Biomater

January 2025

Department of Polymer and Biomaterials Science, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, Szczecin, Poland.

Fabricating complex hierarchical structures mimicking natural vessels and arteries is pivotal for addressing problems of cardiovascular diseases. Various fabrication strategies have been explored to achieve this goal, each contributing unique advantages and challenges to the development of functional vascular grafts. In this study, a three-layered tubular structure resembling vascular grafts was fabricated using biocompatible and biodegradable copolymers of poly(butylene succinate) (PBS) using advanced manufacturing techniques.

View Article and Find Full Text PDF

Ecotoxicity of Biodegradable Microplastics and Bio-based Microplastics: A Review of in vitro and in vivo Studies.

Environ Manage

December 2024

College of Natural Resources and Environment, Northwest A&F University, Yangling, Shaanxi Province, 712100, PR China.

As biodegradable and bio-based plastics increasingly replace conventional plastics, the need for a comprehensive understanding of their ecotoxicity becomes more pressing. This review systematically presents the ecotoxicity of the microplastics (MPs) from different biodegradable plastics and bioplastics on various animals and plants. High doses of polylactic acid (PLA) MPs (10%) have been found to reduce plant nitrogen content and biomass, and affect the accumulation of heavy metals in plants.

View Article and Find Full Text PDF

Microplastics alter the migration and transformation of vanadium in the riverine sediment environment.

Sci Total Environ

December 2024

MOE Key Laboratory of Groundwater Circulation and Environmental Evolution, School of Water Resources and Environment, China University of Geosciences Beijing, Beijing 100083, PR China. Electronic address:

Article Synopsis
  • Microplastics (MPs), particularly biodegradable and non-degradable types, can significantly affect the behavior of vanadium in riverine environments, impacting its movement and transformation.
  • Research revealed that after adding MPs to vanadium-rich sediment, the amount of vanadium in pores decreased while it increased in overlying water, especially with biodegradable MPs.
  • The study highlighted that the presence of biodegradable MPs promoted the growth of specific microbial communities that enhance heavy metal resistance, which in turn affects the chemical dynamics within sediments and increases the mobility of vanadium.
View Article and Find Full Text PDF

(Bio)degradation of biopolymer and biocomposite in deep-sea environments.

Mar Pollut Bull

December 2024

Ifremer RDT, Research and Technology Development Unit, Plouzané 29280, France.

In order to reduce the contamination of marine ecosystems by plastic materials, the scientific community is engaged in the development of biodegradable substitutes for conventional plastics. While certain candidates have been successfully tested in coastal marine environments, the degradation process in deep-sea environments remains poorly understood. This study examined the degradation of two industrial biopolyesters, a poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and a polybutylene-succinate (PBS), in two deep marine environments of the Middle and Eastern Atlantic, at depths of 780 and 1740 m, as well as under laboratory conditions under hydrostatic pressure and without micro-organisms.

View Article and Find Full Text PDF

The discovery of novel plastic degrading enzymes commonly relies on comparing features of the primary sequence to those of known plastic degrading enzymes. However, this approach cannot always guarantee success. This is exemplified by the different degradation rates of the two polymers poly(ethylene terephthalate) (PET) and polybutylene succinate (PBS) by two hydrolases: PETase from and Cut from .

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!