In this work, the droplet size in a water-in-oil emulsion obtained by supersaturation is studied. The emulsion is obtained by cooling down a saturated water/oil solution by a certain temperature difference. The effects of the cooling rate and temperature difference on the produced droplet size are experimentally investigated. The average size of water droplets in the emulsion is found to be proportional to the square root of the cooling rate. By analyzing the time scales of three different steps, including nucleation, droplet growth due to diffusion and coarsening, involved in the emulsification process, it is found that the time scales of nucleation and droplet growth due to mass diffusion are much smaller than the cooling time constant, which is much shorter than the coarsening time scale. A mechanism that links the cooling rate and supersaturation temperature to droplet size is proposed: the cooling rate influences the nucleation and thus droplet density, while the temperature difference, which is linearly proportional to the total volume of precipitated water from the saturated water-in-oil solution, determines the size of each droplet. The droplet size data were found to support this proposed mechanism well. The results obtained from this work may provide useful guidance on controlling the droplet size in the supersaturation-based emulsification process, which has a lot of practical relevance to many applications.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c7cp05905a | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Spontaneous bilateral thyroid follicular cell carcinoma (subtype: compact cellular carcinoma) with C-cell complexes in a male beagle.
J Toxicol Pathol
January 2025
Safety Research Laboratory, Kissei Pharmaceutical Co., Ltd., 2320-1 Maki, Hotaka, Azumino, Nagano 399-8305, Japan.
We report the features of spontaneous bilateral thyroid follicular cell carcinoma in a 10-year-old male beagle. Necropsy revealed bilateral masses on the trachea, corresponding to the left and right sides of the thyroid gland. The masses were elastic, encapsulated, and distinct, with no connecting tumor tissues between them.
View Article and Find Full Text PDFDesign, Preparation, and Ex Vivo Skin Permeation of Doxepin Microemulsion System for Topical Delivery.
J Cosmet Dermatol
January 2025
Department of Pharmaceutics, Faculty of Pharmacy, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran.
Background: Doxepin (DX) is used orally to relieve itching but can cause side effects like blurred vision, dry mouth, and drowsiness due to its antimuscarinic effect. To reduce these adverse effects and improve skin permeation, DX is being developed in topical formulations. This study aims to improve DX skin absorption by developing a microemulsion (ME) formulation (ME-DX).
View Article and Find Full Text PDFOne-step fabrication of ultrathin porous Janus membrane within seconds for waterproof and breathable electronic skin.
Sci Bull (Beijing)
December 2024
State Key Laboratory of Advanced Fiber Materials, Institute of Functional Materials, College of Materials Science and Engineering, Research Base of Textile Materials for Flexible Electronics and Biomedical Applications (China Textile Engineering Society), Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, Shanghai Key Laboratory of Lightweight Composite, Donghua University, Shanghai 201620, China. Electronic address:
It remains a challenge for a simple and scalable method to fabricate ultrathin porous Janus membranes for stretchable on-skin electronics. Here, we propose a one-step droplet spreading phase separation strategy to prepare an ultrathin and easily collected Janus thermoplastic polyurethane (TPU) membrane within seconds. The metal-ion solvation structure mitigated migration kinetics to delay TPU solution demixing, promoting the further penetration of the coagulating solvent.
View Article and Find Full Text PDFMeasuring the size of oil droplets in a flow cytometer using Mie resonances: A possible size calibration ladder for 0.5-6 μm.
Cytometry A
January 2025
Materials Measurements Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland, USA.
An emulsion of silicone oil droplets in aqueous buffer produces a distinctive series of peaks or resonances in the side scatter histogram in a flow cytometer. As many as 12 peaks are observed in the violet-side scatter channel at 405 nm, with half that number observed in the blue side scatter channel at 488 nm. Using the index of refraction of the oil and buffer, the wavelength of light, and the collection angle and gain of the instrument, we assign the peaks to specific diameters at which Mie resonances occur.
View Article and Find Full Text PDFPrecisely Designed Hydrophilic Networks in Microporous Layer for High Performance of Proton Exchange Membrane Fuel Cells.
ACS Appl Mater Interfaces
January 2025
School of Automotive Studies, Tongji University, Shanghai 201804, China.
Proton exchange membrane fuel cell (PEMFC) is considered the next promising generation of power devices for vehicles. The microporous layer (MPL) improves the performance through effective water management. In this study, local hydrophilic networks of nano- and macropores are formed in different MPLs.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!