We report the use of femtosecond laser electronic excitation tagging (FLEET) for velocimetry at a 100-kHz imaging rate. Sequential, single-shot, quantitative velocity profiles of an underexpanded supersonic nitrogen jet were captured at a 100-kHz rate. The signal and lifetime characteristics of the FLEET emission were investigated in a methane flame above a Hencken burner at varying equivalence ratios, and room temperature gas mixtures involving air, methane, and nitrogen. In the post-flame region of the Hencken burner, the emission lifetime was measured as two orders of magnitude lower than lab air conditions. Increasing the equivalence ratio above 1.1 leads to a change in behavior, with a doubled lifetime. By measuring the emission in a cold methane flow, a short-lived signal was measured that decayed after the first microsecond. As a proof of concept for velocimetry in a reacting environment, the exhaust of a pulsed detonator was measured by FLEET. Quantitative velocity information was obtained that corresponded to a maximum centerline velocity of 1800 m/s for the detonation wave. Extension of FLEET to larger scale, complex flow environments is now a viable option.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/AO.56.008632 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A diffractive optical element was paired with femtosecond laser electronic excitation tagging (FLEET) velocimetry and used to probe multiple locations in a high-speed wind tunnel. Two configurations were explored, one that uses the traditional method of viewing from a perspective orthogonal to the beam axis and another that uses a perspective parallel to the beam axis. In the latter, the FLEET emissions are viewed as points that can allow for FLEET measurements in a wall normal fashion without the laser needing to impinge upon the surface.
View Article and Find Full Text PDFFemtosecond laser electronic excitation tagging (FLEET) velocimetry is an important diagnostic technique for seedless velocimetry measurements particularly in supersonic and hypersonic flows. Typical FLEET measurements feature a single laser line and camera system to achieve one-component velocimetry along a line, although some multiple-spot and multiple-component configurations have been demonstrated. In this work, tomographic imaging is used to track the three-dimensional location of many FLEET spots.
View Article and Find Full Text PDFA novel, to the best of our knowledge, optical arrangement is evaluated for performing single-shot femtosecond laser electronic excitation tagging in a 16-point grid (Grid-FLEET) with single-ended optical access. The optical arrangement includes a diffractive optical element beam splitter to produce a grid of laser beams in a simplified, flexible, and efficient manner for tracer-free multi-component molecular tagging velocimetry in a two-dimensional field. Analysis of the optical element with respect to beam forming is described, and Grid-FLEET measurements are evaluated relative to the precision of previously described single-point FLEET measurements using Lagrangian tracking for flow in a laminar jet and around a sharp corner.
View Article and Find Full Text PDFFemtosecond laser electronic excitation tagging (FLEET) is a powerful unseeded velocimetry technique typically used to measure one component of velocity along a line, or two or three components from a dot. In this Letter, we demonstrate a dotted-line FLEET technique which combines the dense profile capability of a line with the ability to perform two-component velocimetry with a single camera on a dot. Our set-up uses a single beam path to create multiple simultaneous spots, more than previously achieved in other FLEET spot configurations.
View Article and Find Full Text PDFFemtosecond laser electronic excitation tagging (FLEET) velocimetry was used in the boundary layer of an ogive-cylinder model in a Mach-6 Ludwieg tube. One-dimensional velocity profiles were extracted from the FLEET signal in laminar boundary layers from pure flows at unit Reynolds numbers ranging from 3.4×10/ to3.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!