Hollow dendritic Ag/Pt alloy nanoparticles were synthesized by a double template method: Ag nanoparticles as the hard template to obtain hollow spheres by a galvanic replacement reaction between PtCl and metallic Ag and surfactant micelles (Brij58) as the soft template to generate porous dendrites. The formation of a Ag/Pt alloy phase was confirmed by XRD and HRTEM. Elemental mapping and line scanning revealed the formation of the hollow architecture. We studied the effects of the Ag/Pt ratio, surfactant and reaction temperature on the morphology. In addition, we explored the formation process of hollow dendritic Ag/Pt nanoparticles by tracking the morphologies of the nanostructures formed at different stages. In order to improve the electrocatalytic property, we controlled the size of the nanoparticles and the thickness of the shell by adjusting the amount of the precursor. We found that these Ag/Pt alloy nanoparticles exhibited high activity (440 mA mg) and stability as an electrocatalyst for catalyzing methanol oxidation.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/c7dt03671j | DOI Listing |
ACS Appl Mater Interfaces
October 2024
State Key Laboratory of Chemical Resource Engineering, Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China.
Electrocatalytic carbon dioxide reduction (CORR) technology enables the conversion of excessive CO into high-value fuels and chemicals, thereby mitigating atmospheric CO concentrations and addressing energy scarcity. Single-atom alloys (SAAs) possess the potential to enhance the CORR performance by full utilization of atoms and breaking linear scaling relationships. However, quickly screening high-performance metal portfolios of SAAs remains a formidable challenge.
View Article and Find Full Text PDFPhys Chem Chem Phys
September 2024
Technische Universität Berlin, Straße des 17. Juni 124, 10623 Berlin, Germany.
Despite its well-known nobility, even platinum is subject to corrosion under the harsh conditions that many technical applications require. Based on the assumption that the platinum loss is mainly caused by the formation of volatile PtO, alloying is a promising strategy to reduce it. This investigation explores the bulk stability of Pt-Au, Pt-Ir, Pt-Re, Pt-W, Pt-Ag, Pt-Rh, Pt-Cu, Pt-Ni and Pt-Co, as well as their oxides, utilizing density functional theory, as well as and literature thermodynamic data.
View Article and Find Full Text PDFMikrochim Acta
May 2024
Department of Pharmaceutical Engineering, School of Biomedical and Pharmaceutical Sciences, Guangdong University of Technology, Guangzhou, 510006, People's Republic of China.
In view of a large number of people infected with Helicobacter pylori (H. pylori) with great harm followed, there is an urgent need to develop a non-invasive, easy-to-operate, and rapid detection method, and to identify effective sterilization strategies. In this study, highly specific nanoprobes with nanozyme activity, Ag@Pt nanoparticles (NPs) with the antibody, were utilized as a novel lateral flow immunoassay (LFIA).
View Article and Find Full Text PDFACS Appl Mater Interfaces
October 2023
Department of Chemistry, Virginia Commonwealth University, Richmond, Virginia 23284-2006, United States.
Assembly of nanoparticles (NPs) into functional macrostructures is imperative for the development of NP-based devices. However, existing methods employ insulating organic ligands, polymers, and biomolecules as mediators for the NP assembly, which are detrimental for charge transport and interparticle coupling that impede the efficient integration of low-dimensional properties. Herein, we report a methodology for the direct self-supported assembly of Ag/Pt/Pd alloy NPs into high surface area (119.
View Article and Find Full Text PDFInorg Chem
October 2023
Inorganic Chemistry and Centre for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen, Essen 45117, Germany.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!