Porous carbon spheres (CSs) have distinct advantages in energy storage and conversion applications. We report the preparation of highly monodisperse N-doped microporous CSs through the carbonization of polystyrene-based polymer spheres and subsequent activation. The N-doped microporous CSs have a remarkably high N-doping content, over 10%, and high BET surface area of 884.9 m g. We characterize the synergistic effects of the micropores and N doping on the energy storage performance of a supercapacitor electrode consisting of the CSs and on the performance in an electrocatalytic reaction of a CS counter electrode in a photovoltaic cell. The N-doped microporous CSs exhibit a maximum capacitance of 373 F g at a current density of 0.2 Ag, a high capacitance retention up to 62% with a 10-fold increase in current density, and excellent stability over 10,000 charge/discharge cycles. A counter electrode consisting of N-doped microporous CSs was found to exhibit superior electrocatalytic behavior to an electrode consisting of conventional Pt nanoparticles. These CSs derived from polymer spheres synthesized by addition polymerization will be new platform materials with high electrochemical performance.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5663965 | PMC |
http://dx.doi.org/10.1038/s41598-017-14686-1 | DOI Listing |
Environ Res
January 2025
Faculty of Exact Sciences and Technology, Federal University of Grande Dourados, Dourados, MS, 79804-970, Brazil. Electronic address:
Transforming lignocellulosic biomass waste into value-added materials like porous carbons offers a sustainable and increasingly important solution for its efficient management within a circular economy framework. Although the heteroatom-doping process enhances oxygen- or nitrogen-containing functionalities on porous carbons, it often leads to losses in structural integrity and other key functionalities. This study presents a novel protocol to produce N-doped porous carbons that efficiently introduces nitrogen groups while improving surface area, microporosity definition and the concentration of oxygen-containing functionalities.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
College of Materials Science and Engineering, Shaanxi Key Laboratory of Green Preparation and Functionalization for Inorganic Materials, Shaanxi University of Science and Technology, Xian 710021, China.
The low conductivity of sulfur substances and the fussy effect of lithium polysulfides (LPS) limit the practical application of lithium-sulfur batteries (LSBs). In this work, NiS is in situ synthesized on N-doped 3D carbon nanofibers with an optimized pore structure as a cathode material for LSBs. The conductive carbon nanofiber skeleton with a hierarchical (micropore-mesopore-macropore) structure etched by Cd can reduce the interface resistance of the cathode and remiss volume expansion during charge-discharge progress.
View Article and Find Full Text PDFJ Colloid Interface Sci
December 2024
Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), West Blvd. Azadi Sports Complex, P.O. Box 14665, 1998 Tehran, Iran.
Herein, a novel nanocomposite was developed to adjust the textural properties of metal-organic frameworks (MOFs) for adsorptive applications. To this end, nitrogen-doped carbon quantum dots/reduced graphene oxide nanocomposite (RC) was embedded into MIL-101(Cr) crystals, named RC-ML-x nanocomposites. The prepared nanoadsorbents were thoroughly characterized by different techniques.
View Article and Find Full Text PDFInt J Biol Macromol
December 2024
Shandong Engineering Research Center for High-efficiency Energy Storage and Hydrogen Energy Utilization, School of Energy and Power Engineering, Shandong University, Jinan, Shandong 250061, China.
Biomass-derived porous carbon (PC) has been widely studied in the field of supercapacitors due to its low cost, sustainability and developed pore structure, but how to screen the precursors of high-performance PC is still a major difficulty. Herein, six lignocellulosic biomass models based on different compositions were innovatively constructed and prepared into high-performance PC by a synergistic activation-doping strategy. The results show that the synergistic activation-doping strategy has a certain universality for biomass models.
View Article and Find Full Text PDFJ Environ Manage
January 2025
State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou, 310027, China; Taizhou Institute of Zhejiang University, Taizhou, 318012, Zhejiang, China.
Adsorption removal of PCDD/Fs from flue gas is one of the important technologies for reducing environmental PCDD/Fs emissions. However, due to the lack of systematic research on the adsorption mechanism of PCDD/Fs, commercial activated carbon (AC) with a single pore size distribution and lack of surface functional groups has poor adsorption and removal efficiency for PCDD/Fs. Therefore, this study first used corncob as a raw material and prepared N-doped hierarchical porous biochar (NHPB) using a one-step activation method for efficient removal of PCDD/Fs.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!