One-dimensional heterostructures have attracted significant interests in various applications. However, the selective deposition of shell material on specific sites of the backbone material remains a challenge. Herein, a facile facet-selective deposition strategy has been developed for the construction of heterostructured α-MoO@FeO nanobelts. Because of the anisotropic feature of α-MoO nanobelts, the FeO nanoparticles selectively deposit on the edges of α-MoO nanobelts, that is, the {100} and {001} facets. Such a heterostructure facilitates the electron transfer in lithium storage. As a result, the α-MoO@FeO nanobelts exhibit high capacities of 913 mA h g after 100 cycles at 200 mA g and 540 mA h g after 100 cycles at 1000 mA g. The facet-selective deposition strategy developed here would be extended to the construction of other novel heterostructures with fascinating physical/chemical properties and wide potential applications.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.7b13529 | DOI Listing |
Nanoscale
July 2022
Nanobiointeractions & Nanodiagnostics, Istituto Italiano di Tecnologia, Via Morego 30, 16163 Genova, Italy.
Synthesizing metal nanoparticles with fine control of size, shape and surface properties is of high interest for applications such as catalysis, nanoplasmonics, and fuel cells. In this contribution, we demonstrate that the citrate-coated surfaces of palladium (Pd) and platinum (Pt)@Pd nanocubes with a lateral length <5 nm and low polydispersity in shape achieve superior catalytic properties. The synthesis achieves great control of the nanoparticle's physico-chemical properties by using only biogenic reagents and bromide ions in water while being fast, easy to perform and scalable.
View Article and Find Full Text PDFChem Commun (Camb)
May 2022
Institute of Advanced Synthesis (IAS), and School of Chemistry and Molecular Engineering, Jiangsu National Synergetic Innovation Centre for Advanced Materials, Nanjing Tech University, Nanjing, 211816, China.
Au particles with rhombic dodecahedron outlines and deep cavities are obtained by epitaxial growth from a triangular nanoplate. An unusual "wrapping" growth that combines ligand-promoted facet-selective growth and site-specific deposition is proposed. Such a templateless growth not only allows the extreme defect-tolerance, but also broadens the synthetic control at the nanoscale.
View Article and Find Full Text PDFNat Commun
September 2021
School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China.
Tuning the facet exposure of Cu could promote the multi-carbon (C2+) products formation in electrocatalytic CO reduction. Here we report the design and realization of a dynamic deposition-etch-bombardment method for Cu(100) facets control without using capping agents and polymer binders. The synthesized Cu(100)-rich films lead to a high Faradaic efficiency of 86.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
November 2021
Joint Center for Artificial Photosynthesis, Chemical Sciences Division, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California, 94720, USA.
Catalysts based on Cu nanocrystals (NCs) for electrochemical CO -to-C conversion with high activity have been a subject of considerable interest, but poor stability and low selectivity for a single C product remain obstacles for realizing sustainable carbon-neutral cycles. Here, we used the facet-selective atomic layer deposition (FS-ALD) technique to selectively cover the (111) surface of Cu NCs with ultrathin Al O to increase the exposed facet ratio of (100)/(111), resulting in a faradaic efficiency ratio of C H /CH for overcoated Cu NCs 22 times higher than that for pure Cu NCs. Peak performance of the overcoated catalyst (Cu NCs/Al O -10C) reaches a C H faradaic efficiency of 60.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2021
Department of Chemical Engineering, Indian Institute of Technology Guwahati, Guwahati, Assam 781039, India.
The spatial separation and transport of photogenerated charge carriers is crucial in building an efficient photocatalyst for solar energy conversion into chemical energy. A step-scheme CdS/MnO-BiVO photocatalyst was synthesized by spatial deposition of MnO and one-dimensional (1D) CdS nanowires on a three-dimensional (3D) decahedron BiVO surface. The photocatalytic activity of CdS/MnO-BiVO for the overall water-splitting reaction was investigated without sacrificial reagent under visible light irradiation.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!