Applicability of Microaerobic Technology to Enhance BTEX Removal from Contaminated Waters.

Appl Biochem Biotechnol

Department of Hydraulic and Environmental Engineering, Federal University of Ceará, Campus do Pici, Bloco 713, Pici, Fortaleza, Ceará, 60455-900, Brazil.

Published: April 2018

As the addition of low concentrations of oxygen can favor the initial degradation of benzene, toluene, ethylbenzene, and xylenes (BTEX) compounds, this work verified the applicability of the microaerobic technology to enhance BTEX removal in an anaerobic bioreactor supplemented with high and low co-substrate (ethanol) concentrations. Additionally, structural alterations on the bioreactor microbiota were assessed throughout the experiment. The bioreactor was fed with a synthetic BTEX-contaminated water (~ 3 mg L of each compound) and operated at a hydraulic retention time of 48 h. The addition of low concentrations of oxygen (1.0 mL min of atmospheric air at 27 °C and 1 atm) assured high removal efficiencies (> 80%) for all compounds under microaerobic conditions. In fact, the applicability of this technology showed to be viable to enhance BTEX removal from contaminated waters, especially concerning benzene (with a 30% removal increase), which is a very recalcitrant compound under anaerobic conditions. However, high concentrations of ethanol adversely affected BTEX removal, especially benzene, under anaerobic and microaerobic conditions. Finally, although bacterial community richness decreased at low concentrations of ethanol, in general, the bioreactor microbiota could deal with the different operational conditions and preserved its functionality during the whole experiment.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s12010-017-2618-xDOI Listing

Publication Analysis

Top Keywords

btex removal
16
enhance btex
12
low concentrations
12
applicability microaerobic
8
microaerobic technology
8
technology enhance
8
removal contaminated
8
contaminated waters
8
addition low
8
concentrations oxygen
8

Similar Publications

Although bioremediation is considered the most environmentally friendly and sustainable technique for remediating contaminated soil and water, it is most effective when combined with physicochemical methods, which allow for the preliminary removal of large quantities of pollutants. This allows microorganisms to efficiently eliminate the remaining contaminants. In addition to requiring the necessary genes and degradation pathways for specific substrates, as well as tolerance to adverse environmental conditions, microorganisms may perform below expectations.

View Article and Find Full Text PDF

Removal of MTBE and BTEX Pollutants from Contaminated Water Using Colloidal Activated Carbon (CAC).

ACS Omega

January 2025

Groundwater Protection Unit, Environmental Department, Saudi Aramco, P.O. Box1977, Dhahran 31311, Saudi Arabia.

Methyl tertiary-butyl ether (MTBE) and BTEX (benzene, toluene, ethylbenzene, and xylenes) are common groundwater contaminants that pose significant health risks. This study investigated the efficiency of a colloidal activated carbon (CAC) material in removing MTBE and BTEX from contaminated water using batch and continuous core flooding systems. In the batch system, a mixture of sand and carbonate was coated with 1-3 g of CAC for the removal of contaminants.

View Article and Find Full Text PDF

Benzene, toluene, ethylbenzene, and xylene (BTEX) exposure is known to be carcinogenic and neurotoxic chemicals to humans. This study investigates the potential of fungal native strains for the bioremediation of BTEX compounds. Fungal isolates were obtained from BTEX-enriched soil, and their ability to degrade these pollutants was evaluated.

View Article and Find Full Text PDF

The biodegradation of organic aromatic compounds in subsurface environments is often hindered by limited dissolved oxygen. While oxygen supplementation can enhance in situ biodegradation, it poses financial and technical challenges. This study explores introducing low-oxygen concentrations in anaerobic environments for efficient contaminant removal, particularly in scenarios where coexisting pollutants are present.

View Article and Find Full Text PDF
Article Synopsis
  • Benzene, toluene, ethylbenzene, and xylene (BTEX) are hazardous compounds found in marine waters, primarily due to oil spills and industrial effluents, necessitating effective bioremediation methods in saline environments.
  • The study evaluated the halotolerance of Aspergillus niger by gradually increasing salinity to 30‰, revealing optimal growth at 25‰ with significant biomass production.
  • Batch reactor experiments showed that the adapted Aspergillus niger could efficiently degrade BTEX compounds, achieving nearly complete removal in 7 days, with benzene being the most effectively adsorbed compound on the fungal biomass.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!