Graphene is ideal filler in nanocomposites due to its unique mechanical, electrical and thermal properties. However, it is challenging to uniformly distribute the large fraction of graphene fillers into a polymer matrix because graphene is not easily functionalized. We report a novel method to introduce a large fraction of graphene into a styrene-butadiene rubber (SBR) matrix. The obtained graphene/rubber nanocomposites were mechanically enhanced, acoustically absorptive under water, and electrically and thermally conductive. The Young's modulus of the nanocomposites was enhanced by over 30 times over that for rubber. The electrical conductivity of nanocomposites was ≤219 S m with 15% volume fraction of graphene content, and exhibited remarkable electromagnetic shielding efficiency of 45 dB at 8-12 GHz. The thermal conductivity of the nanocomposites was ≤2.922 W m k, which was superior to the values of thermally conductive silicone rubber thermal interface materials. Moreover, the nanocomposites exhibited excellent underwater sound absorption (average absorption coefficient >0.8 at 6-30 kHz). Notably, the absorption performance of graphene/SBR nanocomposites increased with increasing water pressure. These multifunctional graphene/SBR nanocomposites have promising applications in electronics, thermal management and marine engineering.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c7nr05189a | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Acid resistance and bond strength of calcium-containing adhesive on ename.
Int Dent J
January 2025
Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Bunkyo-ku, Tokyo, Japan.
Introduction And Aims: Marginal sealing by enamel bonding is important to enhance the durability of the restoration and prevent secondary caries after operative procedure. This study aimed to evaluate the enamel acid resistance and bond strength of an experimental calcium-containing adhesive system.
Methods: All materials were provided by Kuraray Noritake Dental, Inc.
Synthesis and biological assessment of BUB1B inhibitors for the treatment of clear cell renal cell carcinoma.
Eur J Med Chem
January 2025
Science for Life Laboratory, KTH - Royal Institute of Technology, Stockholm, SE, 17165, Sweden; Centre for Host-Microbiome Interactions, Faculty of Dentistry, Oral & Craniofacial Sciences, King's College London, London, SE1 9RT, UK. Electronic address:
Clear cell renal cell carcinoma (ccRCC) presents substantial therapeutic challenges due to its molecular heterogeneity, limited response to conventional therapies, and widespread drug resistance. Recent advancements in molecular research have identified novel targets, such as BUB1B, which has been identified through global transcriptomic profiling and gene co-expression network analysis as critical in ccRCC progression. In this study, we synthesized 40 novel derivatives of TG-101209 to modulate BUB1B expression and activity, leading to the induction of apoptosis in Caki-1 cells.
View Article and Find Full Text PDFEcophysiological responses to heat waves in the marine intertidal zone.
J Exp Biol
January 2025
Department of Biology, San Francisco State University, San Francisco, CA 94132, USA.
One notable consequence of climate change is an increase in the frequency, scale and severity of heat waves. Heat waves in terrestrial habitats (atmospheric heat waves, AHW) and marine habitats (marine heat waves, MHW) have received considerable attention as environmental forces that impact organisms, populations and whole ecosystems. Only one ecosystem, the intertidal zone, experiences both MHWs and AHWs.
View Article and Find Full Text PDFUniversal Construction of Electrical Insulation and High-Thermal-Conductivity Composites Based on the In Situ Exfoliation of Boron Nitride-Graphene Hybrid Filler.
ACS Appl Mater Interfaces
January 2025
Institute of Soft-matter and Advanced Functional Materials, Gansu Province Carbon New Material Industry Technology Center, School of Materials and Energy, Lanzhou University, Lanzhou 730000, China.
Hexagonal boron nitride (h-BN), with excellent thermal conductivity and insulation capability, has garnered significant attention in the field of electronic thermal management. However, the thermal conductivity of the h-BN-enhanced polymer composite material is far from that expected because of the insurmountable interfacial thermal resistance. In order to realize the high thermal conductivity of polymer composite thermal interface materials, herein, an in situ exfoliation method has been employed to prepare a boron nitride nanosheet-graphene (BNNS-Gr) hybrid filler.
View Article and Find Full Text PDFUltralight and Flexible Subnanowire Aerogels for Intrinsically Hydrophobic Thermal Insulation.
ACS Appl Mater Interfaces
January 2025
School of Materials Science and Engineering, Xiangtan University, Xiangtan, Hunan 411105, P. R. China.
Aerogels are regarded as the next generation of thermal insulators; however, conventional aerogels suffer from issues such as brittleness, low moisture resistance, and a complex production process. Subnanowires (SNWs) are emerging materials known for their exceptional flexibility, toughness, intrinsic hydrophobicity, and gelling capabilities, making them ideal building blocks for flexible, tough, hydrophobic, and thermally insulating aerogels. Herein, we present a simple and scalable strategy to construct SNW aerogels by freeze-drying hydroxyapatite (HAP) SNW dispersions in cyclohexane.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!