The objective of the study was to select solid-state plasticizers for hot-melt extrusion (HME) process. The physical and mechanical properties of plasticizers, in selected binary (polymer:plasticizer) and ternary (active pharmaceutical ingredient:polymer:plasticizer) systems, were evaluated to assess their effectiveness as processing aids for HME process. Indomethacin and Eudragit E PO were selected as model active pharmaceutical ingredient and polymer, respectively. Solubility parameters, thermal analysis, and rheological evaluation were used as assessment tools. Based on comparable solubility parameters, stearic acid, glyceryl behenate, and polyethylene glycol 8000 were selected as solid-state plasticizers. Binary and ternary physical mixtures were evaluated as a function of plasticizer concentration for thermal and rheological behavior. The thermal and rheological assessments also confirmed the miscibility predictions from solubility parameters. The understanding of thermal and rheological properties of the various mixtures helped in predicating plasticization efficiency of stearic acid, glyceryl behenate, and polyethylene glycol 8000. The evaluation also provided insight into the properties of the final product. An empirical model was also developed correlating rheological property of physical mixtures to actual HME process. Based on plasticizer efficiency, solid-state plasticizers and processing conditions can be selected for a HME process.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.xphs.2017.09.004 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Supramolecular modification of sustainable high-molar-mass polymers for improved processing and performance.
Nat Commun
January 2025
Ecole Polytechnique Fédérale de Lausanne (EPFL), Institute of Materials, Laboratory of Macromolecular and Organic Materials, Lausanne, Switzerland.
The plastic waste crisis is among humanity's most urgent challenges. However, widespread adoption of sustainable plastics is hindered by their often inadequate processing characteristics and performance. Here, we introduce a bio-inspired strategy for the modification of a representative high molar mass, biodegradable aliphatic polyester that helps overcome these limitations and remains effective at molar masses far greater than the entanglement molar mass.
View Article and Find Full Text PDFProduct oriented upcycling of waste polyethylene terephthalate plastic and carbon dioxide via decoupled electrolysis.
ChemSusChem
December 2024
Beijing University of Chemical Technology, College of Chemistry, CHINA.
End-of-life plastics and carbon dioxide (CO2) are anthropogenic waste carbon resources; it is imperative to develop efficient technologies to convert them to value-added products. Here we report the upcycling of polyethylene terephthalate (PET) plastic and CO2 toward valuable potassium diformate, terephthalic acid, and H2 fuel via decoupled electrolysis. This product-oriented process is realized by two electrolyzers: (1) a solid-state-electrolyte based CO2 electrolyzer and (2) a solid-polymer-electrolyte-based PET electrolyzer.
View Article and Find Full Text PDFObservation of H-H J-couplings in fast magic-angle-spinning solid-state NMR spectroscopy.
Nat Commun
December 2024
Institut des Sciences et Ingénierie Chimiques, École Polytechnique Fédérale de Lausanne (EPFL), CH-1015, Lausanne, Switzerland.
While H-H J-couplings are the cornerstone of all spectral assignment methods in solution-state NMR, they are yet to be observed in solids. Here we observe H-H J-couplings in plastic crystals of (1S)-(-)-camphor in solid-state NMR at magic angle spinning (MAS) rates of 100 kHz and above. This is enabled in this special case because the intrinsic coherence lifetimes at fast MAS rates become longer than the inverse of the H-H J couplings.
View Article and Find Full Text PDFSolid-State Oxide-Ion Synaptic Transistor for Neuromorphic Computing.
Adv Mater
December 2024
Catalonia Institute for Energy Research (IREC), Jardins de les Dones de Negre 1, 2, Sant Adriá de Besós, Barcelona, 08930, Spain.
Neuromorphic hardware facilitates rapid and energy-efficient training and operation of neural network models for artificial intelligence. However, existing analog in-memory computing devices, like memristors, continue to face significant challenges that impede their commercialization. These challenges include high variability due to their stochastic nature.
View Article and Find Full Text PDFNon-Flammable fluorinated gel polymer electrolyte for safe lithium metal batteries in harsh environments.
J Colloid Interface Sci
December 2024
Jiangsu Key Laboratory of Materials and Technologies for Energy Storage, College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China; State Key Laboratory of Mechanics and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
Compared to liquid electrolytes, gel polymer electrolytes (GPEs) offer enhanced safety and represent an up-and-coming option for high-energy-density lithium metal batteries (LMBs). However, several challenges hindered the practical application of GPEs for LMBs, such as low ionic conductivity at room temperature, decomposition at high voltage, and poor interfacial compatibility with lithium anode. In this study, a non-flammable fluorinated GPE was synthesized using 2,2,2-trifluoroethyl acrylate (TFEA) and ethoxylated trimethylolpropane triacrylate (ETPTA) as precursor materials, with succinonitrile (SN) incorporated as a plasticizer and a dual-salt system of lithium bis(trifluoro-methane) sulfonimide and lithium difluoroxalate borate.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!