Chemometric optimization of the extraction and derivatization of parabens for their determination in water samples by rotating-disk sorptive extraction and gas chromatography mass spectrometry.

A combination of rotating disk sorptive extraction (RDSE) using Oasis® HLB as the sorbent phase and gas chromatography mass spectrometry (GC-MS) has been performed for the determination of four of the most widely used parabens: methylparaben, ethylparaben, propylparaben and n-butylparaben. The extraction and derivatization of the analytes in water samples were optimized by using factorial (screening) and Doehlert designs, thus reducing the number of analyses with the concomitant reduction of time, reagents, waste, samples and cost. Thus, a RDSE method using 20mL of sample was performed. The disk was rotated at 2900rpm for 70min at room temperature. After a desorption step and evaporation of solvent, a derivatization method using 5μL of N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA) for 15min at room temperature was used previously to inject the final extract into GC-MS. The detection limits and precision (%RSD) were lower than 0.05μgL and 9.7% for the studied compounds, respectively. Recoveries were studied using effluent samples of a wastewater treatment plant (WWTP), with values higher than 80% being obtained. The applicability and reliability of this methodology were confirmed through the analysis of tap water and influents from Santiago, Chile, with concentration values ranging from 0.57 to 0.83μgL in influents. The main advantage of the present RDSE method is that it is significantly faster than its counterpart by SBSE and requires a considerable lower volume of derivatizing agent.