Organic dyes possessing conjugated π-framework forms closely packed monolayers on photoanode in dye-sensitized solar cell (DSSC), because of the limitation to control the orientation and the extend of intermolecular π-π interaction, self-aggregation of dyes leads to reduced cell performance. In this report, a series of homodimeric (D-D and D-D) and heterodimeric (D-D and D-D) donor/acceptor (D/A) dyes containing spiroBiProDOT π-spacer were designed and synthesized by utilizing Pd-catalyzed direct arylation reaction and correlates the device performance with monomeric dyes (D and D). Both the thiophenes (π-spacer) of spiroBiProDOT were functionalized with same or different donor groups which led to homodimeric and heterodimeric chromophores in a single sensitizer. The homodimeric spiro-dye D-D showed higher power conversion efficiency (PCE), of 7.6% with a V and J of 0.672 V and 16.16 mA/cm, respectively. On the other hand, the monomeric D exhibited a PCE of 3.2% (V of 0.64 V and J of 7.2 mA/cm), which is lower by 2.4 fold compared to dimeric analogue. The spiro-unit provides flexibility between the incorporated chromophores to orient on TiO due to four sp-centers, which arrest the molecular motions after chemisorption. This study shows a new molecular approach to incorporate two chromophores in the dimeric dye possessing complementary absorption characteristics toward panchromatic absorption. The attenuated charge recombination at TiO/Dye/redox couple interface in case of D-D, owing to better passivation of TiO surface, was elucidated through impedance analysis. The FT-IR spectrum of D-D adsorbed on TiO film indicated both the carboxylic units were involved in chemisorption which makes strong coupling between dye and TiO.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.7b09010DOI Listing

Publication Analysis

Top Keywords

dye-sensitized solar
8
charge recombination
8
d-d d-d
8
d-d
7
dyes
5
orthogonally functionalized
4
functionalized donor/acceptor
4
donor/acceptor homo-
4
homo- heterodimeric
4
heterodimeric dyes
4

Similar Publications

Dye-sensitization is a promising strategy to improve the light absorption and photoactivity abilities of wide-bandgap semiconductors, like TiO. For effective water-splitting photoanodes with no sacrificial agents, the electrochemical potential of the dye must exceed the thermodynamic threshold needed for the oxygen evolution reaction. This study investigates two promising organic cyanoacrylic dyes, designed to meet that criterion by means of theoretical calculations.

View Article and Find Full Text PDF

Dye-Sensitized Solar Cells with Modified TiO Scattering Layer Produced by Hydrothermal Method.

Materials (Basel)

January 2025

Department of Materials Science and Engineering, National Dong Hwa University, Hualien 974301, Taiwan.

This work proposes dye-sensitized solar cells (DSSCs) with various photoanode designs. A hydrothermal method is used to synthesize hydrangea-shaped TiO (H-TiO) aggregates. The X-ray diffraction (XRD) pattern of H-TiO reveals only an anatase phase.

View Article and Find Full Text PDF

Hydrogen-substituted graphdiyne (HsGDY) is a two-dimensional material with an sp-sp carbon skeleton featuring a band gap and a porous structure that enhances ion diffusion. In previous reports, HsGDY growth was limited to metal substrates such as Cu, which then required transfer. Here, we developed a sandwich method that allows HsGDY to be grown directly on the target substrate.

View Article and Find Full Text PDF

Background: The demand for sustainable energy solutions has increased interest in natural microalgal dyes as photosensitizers in dye-sensitized solar cells (DSSCs). This study addresses the critical issue of maximizing dye integrity and yield during extraction, particularly the degradation that occurs at temperatures above 60 °C. Our investigation of dye extraction from Asterarcys quadricellulare and Scenedesmus sp.

View Article and Find Full Text PDF

The efficient functioning of dye-sensitized solar cells (DSSCs) is governed by the interplay of three essential components: the semiconductor, the dye, and the electrolyte. While the impact of the electrolyte composition on the device's performance has been extensively studied in n-type DSSCs, much less is known about p-type-based devices. Here, we investigate the effect of potential-determining ions on the energetics and stability of dye-sensitized NiO surfaces by using electrochemical, ab initio molecular dynamics simulations, and ab initio electronic structure calculations.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!