The application of modified agricultural wastes for removing polycyclic aromatic hydrocarbons (PAHs) from water is gaining a growing interest. However, most modified methods using synthetic chemicals may cause secondary pollution. To overcome this limitation, in this study, a rhamnolipid modified corn stalk (RL-CS) for the removal of phenanthrene (PHE) from aqueous solution was prepared using a rhamnolipid-enhanced acid modification method. RL-CS with higher surface area and lower polarity exhibited higher PHE removal efficiency than that of raw corn stalk (RCS). The adsorption kinetics of RL-CS fitted well with pseudo-second-order kinetics (R > 0.999). Sorption coefficients and carbon-normalized sorption coefficient of RL-CS were 4.68 and 2.86 times higher than that of RCS. Sorption process of RL-CS was nonlinear. Meanwhile, the sorption was an exothermic process and could occur spontaneously. The present study demonstrated that biosurfactant-modified biosorbent RL-CS may be of great potential for the removal of low concentrations of PAHs from the contaminated waters.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.2166/wst.2017.281 | DOI Listing |
J Environ Manage
January 2025
College of Environmental Science, Sichuan Agricultural University, Chengdu, Sichuan, 611130, PR China; Sichuan Provincial Engineering Research Center of Agricultural Non-point Source Pollution Control, Sichuan Agricultural University, Chengdu, Sichuan, 611130, PR China.
As a newly developed technology, lignocellulose pretreatment of PHP (phosphoric acid coupled with hydrogen peroxide) can facilitate the enzymatic hydrolysis of pretreated lignocellulose for glucose production. It also has been found that the derived oxidative tail gas from pretreatment can facilely degrade organic pollutant. To balance the pollutant degradation and the glucose yield, the collaborative optimization on pretreatment was investigated.
View Article and Find Full Text PDFSci Rep
January 2025
College of Civil Engineering, Liaoning Technical University, Fuxin, 123000, P. R. China.
Aeolian sandy soil is barren and readily leads to low fertilizer utilization rates and yields. Therefore, it is imperative to improve the water and fertilizer retention capacity of these soils. In this paper, three kinds of biochar (rice husk, corn stalk, and bamboo charcoal) and bentonite were used as amendments in the first year of the experiment.
View Article and Find Full Text PDFJ Chromatogr Sci
January 2025
Pesticide Residue Analysis Laboratory, Department of Entomology, Punjab Agricultural University, Ludhiana 141004, Punjab, India.
Validation of Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) method was performed for estimation of imidacloprid (IM) and its metabolites in maize leaves, immature kernels, mature kernels, stalk, and soil using liquid chromatograph tandem mass spectrometry, coupled with electrospray ionization. The extraction in different matrices of maize and soil was performed using acetonitrile +0.1% formic acid followed by clean-up with primary secondary amine sorbent and anhydrous magnesium sulfate.
View Article and Find Full Text PDFJ Appl Genet
January 2025
Department of Plant Protection, Division of Plant Pathology and Mycology, Wrocław University of Environmental and Life Sciences, Grunwaldzki 24A, 50-363, Wrocław, Poland.
Fusarium stalk rot is the main factor reducing the quality of maize grain and leads to significant yield losses, which that ranges from 20 to 100%, depending on the degree of infection and weather conditions. Understanding its genetic mechanism is key to improving grain quality and ultimate yield. An experiment with 26 doubled haploid (DH) lines of maize was conducted in the northern part of the Lower Silesia Province in Poland over a ten-year period (2013-2022).
View Article and Find Full Text PDFPolymers (Basel)
December 2024
College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China.
Corn stalk fibers extracted from cattle manure (CSFCM) represent a unique class of natural fibers that undergo biological pre-treatment during ruminant digestion. This study systematically investigates the optimization of CSFCM-reinforced friction materials through controlled silane treatment (2-10 wt.%).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!