The aim of this study was to evaluate the emissions of polycyclic aromatic hydrocarbons (PAHs) bound to the particulate matter (PM) during the combustion of raw pyrolysis volatiles (bio-oil and pyrogas mixture) generated from the pyrolysis of rice husk. Five different raw pyrolysis volatiles were produced at varying pyrolysis temperatures (400-800°C) and subsequently combusted in a laboratory-scale, continuous pyrolysis-combustion facility at 850°C. 15 priority pollutant PAH levels in the resulting biochar, bio-oil, and PM were evaluated. Results showed that combustion of the raw pyrolysis volatiles produced at elevated pyrolysis temperatures resulted in greater concentrations of PM-bound PAHs (119% increase between 400 and 800°C) due to the increased PAH and oxy-aromatic content of the bio-oil fraction. Significantly increased benzo(a)pyrene (BaP) - equivalent toxicity of the biochar and PM was observed at elevated pyrolysis temperatures.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.biortech.2017.08.091 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Recovery of Nd and Dy from E-Waste Using Adsorbents from Spent Tyre Rubbers: Batch and Column Dynamic Assays.
Molecules
December 2024
LAQV/REQUIMTE, Associated Laboratory for Green Chemistry, Department of Chemistry, NOVA School of Science and Technology, NOVA University Lisbon, 2829-516 Caparica, Portugal.
This paper investigates the use of spent tyre rubber as a precursor for synthesising adsorbents to recover rare earth elements. Through pyrolysis and CO activation, tyre rubber is converted into porous carbonaceous materials with surface properties suited for rare earth element adsorption. The study also examines the efficiency of leaching rare earth elements from NdFeB magnets using optimised acid leaching methods, providing insights into recovery processes.
View Article and Find Full Text PDF[Effects of By-products of Co-pyrolysis on Biochar for Benzene Vapor Adsorption Performance].
Huan Jing Ke Xue
January 2025
Department of Environmental Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, China.
To explore the effects of the components in the raw materials and by-products of co-pyrolysis on the physicochemical properties of biochar, rice husk （RH, which has a high percentage of lignin and a low content of N） and sawdust （SD, which has a high percentage of both cellulose and N） were used as typical raw materials to prepare co-pyrolysis biochar. The benzene vapor adsorption performance of the obtained biochar was then tested on a fixed-bed device. At the same time, the by-product components generated during pyrolysis were analyzed using thermogravimetric （TG）, scanning electron microscopy （SEM）, and gas chromatography-mass spectrometry （GC-MS）.
View Article and Find Full Text PDFDioxin-like polychlorinated biphenyls (dl-PCB) in hydrochars and biochars: Review of recent evidence, pollution levels, critical gaps, formation mechanisms and regulations.
J Hazard Mater
November 2024
Energy and Resources Institute, Charles Darwin University, Ellengowan Drive, Purple 12.01.08, Casuarina, NT 0810, Australia. Electronic address:
Contamination of chars with dioxin-like polychlorinated biphenyls (dl-PCB) significantly limits their use and hinders their deployment in the circular bioeconomy, specifically in applications that may lead to dietary exposure. Here, for the first time, we review the levels of contamination of chars produced from pyrolysis and hydrothermal carbonisation (HTC) with dl-PCB congeners. We conduct a detailed and critical examination of the role played by the processing parameters, such as temperature and residence time, and the reaction mechanisms, to detoxify the biomass under an oxygen-free atmosphere during its valorisation.
View Article and Find Full Text PDFAdsorption properties and competitive adsorption mechanism exhibited by carbon-nanotube-modified biochar for removal of crude oil and Ni(II) pollutants from water.
Ecotoxicol Environ Saf
December 2024
Colleges of Animal Science and Technology, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang 163319, China.
Carbon-nanotube-modified biochar (CNT3-CBC) with a nanostructured surface was prepared by using cattle manure as the raw material via the impregnation method. This modified biochar was then used to adsorb petroleum and Ni(II) from aqueous solutions. Various physicochemical characterization techniques were employed, including SEM, BET analysis, FTIR, and XPS.
View Article and Find Full Text PDFBiochar as Sustainable Filler of Recycled Polylactic Acid (PLA): A New Generation of Processable Biocomposites.
Polymers (Basel)
November 2024
Department of Chemistry and Biology "A. Zambelli", INSTM Research Unit, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy.
As an alternative to fossil-based polymers, polylactide acid (PLA) has stimulated a significant research effort in the past few years due to the demand for environmentally friendly products. Even though PLA is considered a sustainable or bio-based material, the long-term degradation in ambient conditions increases the volume of waste at end-of-life. To overcome this issue, PLA waste can be recycled to produce new manufactures; however, this approach does not always ensure the same mechanical properties as the original PLA.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!