Production of cellulose nanofibers using phenolic enhanced surface oxidation.

Carbohydr Polym

Laboratory of Renewable Resources Engineering and Department of Agricultural and Biological Engineering, Purdue University, West Lafayette, IN, United States. Electronic address:

Published: October 2017

In this study we demonstrate that lignin monomers formed as byproducts of pulping or bioprocessing of lignocellulosic biomass is an effective enhancer to oxidize cellulose surfaces with ozone for the production of cellulose nanofibers (CNF). Never dried softwood pulp with minimum mercerization was enzymatically treated leading to a homogeneous pulp slurry with a higher reactivity. The slurry was oxidized by ozone gas in the presence of syringic acid, a lignin degradation model compound, as an oxidation enhancer at room temperature and pH 11. Transmission electron microscopy (TEM) observations showed that stable CNF bundles with 3-10nm widths and lengths >100nm were obtained after ultrasonication of the oxidized product in water. Extensive characterization of the new CNF films revealed the nanofibers had carboxylate content similar to conventional carboxylated cellulose prepared by TEMPO-mediated oxidation. Based on NMR spectra, chemical conversion of the syringic acid during oxidation is proposed.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.carbpol.2017.06.058DOI Listing

Publication Analysis

Top Keywords

production cellulose
8
cellulose nanofibers
8
syringic acid
8
nanofibers phenolic
4
phenolic enhanced
4
enhanced surface
4
oxidation
4
surface oxidation
4
oxidation study
4
study demonstrate
4

Similar Publications

Adhesive-Free, Light, and Strong Particle Board.

Nano Lett

January 2025

National Laboratory of Solid State Microstructures, Department of Materials Science and Engineering, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, China.

Wood particle boards are massively used in construction and household products. But they often raise health and environmental concerns because of the formaldehyde-based adhesives. More sustainable and high-strength particle boards are developed on a bio-based materials or their derivatives.

View Article and Find Full Text PDF

This study describes a microfluidic thread-based analytical device (μTAD) capable of in situ mass spectrometric analysis for continuous flow reaction monitoring. Organic reaction screening is foundational to drug discovery. Microfluidic devices are of special interest here because they provide continuous reaction monitoring with advantages such as the use of smaller reagent volumes and short analysis times.

View Article and Find Full Text PDF

Radiative cooling textiles designed to reflect incoming sunlight and enhance mid-infrared (MIR) emissivity show great potential for ensuring personal thermal comfort. Thus, these textiles are gaining prominence as a means of combating the heat stress induced by global warming. Nonetheless, integrating radiative cooling effects into scalable textile materials for personal thermoregulation remains a formidable challenge.

View Article and Find Full Text PDF

The aim was to explore the efficiency of Tideglusib in bone tissue healing by carrying it with different scaffolds on rat calvarial lesions. Twentyfour male Dawley rats were utilized. Two bone defects of 5 mm in diameter were formed (n = 8).

View Article and Find Full Text PDF

Lead-containing wastewater has been a significant challenge in the field of wastewater treatment. Cellulose surface has a large number of active sites, which is conducive to load modification. And amino acids have rich functional groups, which is a good choice for cellulose modification.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!