A new class of electrolyte additives based on cyclic fluorinated phosphate esters was rationally designed and identified as being able to stabilize the surface of a LiNiMnCoO (NMC532) cathode when cycled at potentials higher than 4.6 V vs Li/Li. Cyclic fluorinated phosphates were designed to incorporate functionalities of various existing additives to maximize their utilization. The synthesis and characterization of these new additives are described and their electrochemical performance in a NMC532/graphite cell cycled between 4.6 and 3.0 V are investigated. With 1.0 wt % 2-(2,2,2-trifluoroethoxy)-1,3,2-dioxaphospholane 2-oxide (TFEOP) in the conventional electrolyte the NMC532/graphite cell exhibited much improved capacity retention compared to that without any additive. The additive is believed to form a passivation layer on the surface of the cathode via a sacrificial polymerization reaction as evidenced by X-ray photoelectron spectroscopy (XPS) and nuclear magnetic resonsance (NMR) analysis results. The rational pathway of a cathode-electrolyte-interface formation was proposed for this type of additive. Both experimental results and the mechanism hypothesis suggest the effectiveness of the additive stems from both the polymerizable cyclic ring and the electron-withdrawing fluorinated alkyl group in the phosphate molecular structure. The successful development of cyclic fluorinated phosphate additives demonstrated that this new functionality selection principle, by incorporating useful functionalities of various additives into one molecule, is an effective approach for the development of new additives.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.7b08953 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Gold(I)-Catalyzed [2 + 2] and [3 + 2] Cycloadditions of 1,1-Difluoroallenes with Aldehydes: Switchable Syntheses of Fluorinated Oxetanes and Furans.
Org Lett
January 2025
Division of Chemistry, Faculty of Pure and Applied Sciences, University of Tsukuba, Tsukuba, Ibaraki 305-8571, Japan.
1,1-Difluoroallenes underwent regioselective [2 + 2] and [3 + 2] cycloadditions with aldehydes using Au(I) catalysts. An AuCl catalyst enabled an α,β-selective [2 + 2] cycloaddition of 1,1-difluoroallenes, yielding ()-3-alkylidene-2,2-difluorooxetanes. Conversely, an AuCl(IPr)-AgSbF catalyst facilitated an α,γ-selective [3 + 2] cycloaddition, followed by dehydrofluorination to produce aromatized 2-fluorofurans.
View Article and Find Full Text PDFDichlorination of olefins with trichloroisocyanuric acid (TCCA) and tetrabutylammonium chloride (TBACl).
Org Biomol Chem
January 2025
Department of Chemistry, Faculty of Arts and Sciences, Amasya University, Amasya, Turkey.
Herein, a new metal-free, molecular chlorine-free, environmentally friendly, atom-economical, short time, inexpensive and simple operation method with mild reaction conditions for chlorination of alkenes, cyclic alkenes, ,-unsaturated carbonyl compounds, heteroaromatics, and natural products was reported with up to 96% yields using trichloroisocyanuric acid (TCCA) as the electrophilic chlorine source and TBACl as the nucleophilic chlorine source. It was demonstrated with bicyclic alkene benzonorbornadiene that regioselective chlorobromination and dibromination reactions can be carried out through TCCA/TBABr redox reactions, where TCCA acts as an oxidant in the presence of TBABr. The structures of the redox products were confirmed as a result of control experiments conducted with the newly presented DBI/TBACl and DBI/TBABr halogenation pairs.
View Article and Find Full Text PDFFluorinated Cyclic Olefin Copolymers (COCs) and Cyclic Olefin Polymers (COPs).
Macromol Rapid Commun
January 2025
State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Renmin Street 5625, Changchun, 130022, China.
The demand for insulating materials with superior dielectric properties has increased. Among these materials, polymers containing cyclic structure including cyclic olefin copolymer (COC) and cyclic olefin polymer (COP) stand out because of their excellent dielectric properties originating from the pure hydrocarbon structure. Introducing fluorine into polymers is one efficient strategy for optimizing the dielectric and the related important properties.
View Article and Find Full Text PDFLaF@SiO yolk-shell heterostructure nanofiber-modified separator enhances the long-cycling performance of lithium-sulfur batteries.
J Colloid Interface Sci
December 2024
College of Materials Science and Engineering, Changchun University of Science and Technology, Changchun 130022, China; Key Laboratory of Applied Chemistry and Nanotechnology at Universities of Jilin Province, Changchun University of Science and Technology, Changchun 130022, China. Electronic address:
High-energy-density lithium-sulfur (Li-S) cells are identified as one of the most prospective next-generation energy storage appliances owing to their numerous advantages. Nonetheless, their widespread applications are restricted by the unwanted shuttling effect and tardy conversion reaction kinetics of lithium polysulfides (LiPSs). To address these puzzles, we present an innovative strategy for the one-pot synthesis of LaF@SiO yolk-shell heterostructure nanofibers (YSHNFs) through a straightforward uniaxial electrospinning process coupled with fluorination, avoiding the complexities of traditional methods.
View Article and Find Full Text PDFSynthesis of extended fluorinated tripeptides based on the tetrahydropyridazine scaffold.
Beilstein J Org Chem
December 2024
UMR 8076, BioCIS, CNRS, Université Paris-Saclay, avenue des sciences, 91400 Orsay, France.
The synthesis of tripeptides incorporating new fluorinated heterocyclic hydrazino acids, based on the tetrahydropyridazine scaffold is described. Starting from simple fluorinated hydrazones, these non-proteinogenic cyclic β-amino acids were easily prepared by a zinc-catalyzed aza-Barbier reaction followed by an intramolecular Michael addition. Preliminary conformational studies on tripeptides including this scaffold in the central position show an extended conformation in solution (NMR) and in the solid state (X-ray).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!