This paper describes an intrafascicular neural interface for peripheral nerve implantation. The flexible penetrating microelectrode array with varying lengths (vl-FPMA), interconnection cable, wireless recording and stimulator modules were designed and fabricated to detect neural signals from the peripheral nerves or to stimulate them. The vl-FPMA consisted of silicon needles and polydimethylsiloxane (PDMS) platform supporting the needles. The length of electrode needles varied from 600 to 1000 μm. The interconnection cable was fabricated as parylene-metal-parylene sandwiched structure. The wireless recording/stimulation modules were also developed and connected with the electrodes. The integrated system was implanted in the sciatic nerve of beagles and the recording capability of the integrated system was demonstrated successfully.

Download full-text PDF

Source
http://dx.doi.org/10.1109/ICORR.2017.8009354DOI Listing

Publication Analysis

Top Keywords

intrafascicular neural
8
neural interface
8
interface peripheral
8
peripheral nerve
8
nerve implantation
8
interconnection cable
8
integrated system
8
development intrafascicular
4
implantation paper
4
paper describes
4

Similar Publications

Intraneural Device for Electrostimulation of Vagus Nerve in Rats: A Feasibility Study for Modulating Glucose Tolerance.

Neuromodulation

November 2024

Laboratory of Energy and Data Science, Division of Smart Sector Integration, Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Casaccia Research Center, Rome, Italy. Electronic address:

Objectives: This study introduces EMPATIC (Electro-Modulation of PAncreaTic Islet Cells), a miniaturized intraneural device designed for transversal insertion into small nerves with a mean diameter of 400 μm. EMPATIC aims to modulate glucose tolerance through intraneural vagus nerve stimulation (VNS) in rats.

Materials And Methods: EMPATIC design was optimized to fit into the cervical vagus nerve of rats and was developd through thin film microtechnologies.

View Article and Find Full Text PDF

Peripheral nerve stimulation (PNS) has been demonstrated as an effective way to selectively activate muscles and to produce fine hand movements. However, sequential multi-joint upper limb movements, which are critical for paralysis rehabilitation, has not been tested with PNS. Here, we aimed to restore multiple upper limb joint movements through an intraneural interface with a single electrode, achieving coherent reach-grasp-pull movement tasks through sequential stimulation.

View Article and Find Full Text PDF
Article Synopsis
  • The article reviews the complexities of postoperative nerve injuries related to nerve blocks, examining various mechanisms, risk factors, and prevention strategies.
  • Recent advancements like ultrasound and nerve stimulators have been integrated into practice to minimize nerve injury rates, highlighting the importance of avoiding intrafascicular injections and proper patient selection.
  • The review emphasizes that while direct nerve injury from nerve blocks is rare, factors such as surgical manipulation and patient conditions can complicate diagnosis and underscore the need for careful precautionary measures during surgical procedures.
View Article and Find Full Text PDF

Compound nerve action potentials (CNAPs) were used as a metric to assess the stimulation performance of a novel high-density, transverse, intrafascicular electrode in rat models. We show characteristic CNAPs recorded from distally implanted cuff electrodes. Evaluation of the CNAPs as a function of stimulus current and calculation of recruitment plots were used to obtain a qualitative approximation of the neural interface's placement and orientation inside the nerve.

View Article and Find Full Text PDF

One of the critical factors determining the performance of neural interfaces is the electrode material used to establish electrical communication with the neural tissue, which needs to meet strict electrical, electrochemical, mechanical, biological and microfabrication compatibility requirements. This work presents a nanoporous graphene-based thin-film technology and its engineering to form flexible neural interfaces. The developed technology allows the fabrication of small microelectrodes (25 µm diameter) while achieving low impedance (∼25 kΩ) and high charge injection (3-5 mC cm).

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!